Ammbusher Skid Steer Talon Grapple
$Call For Our "Below List Prices!"
Made in the USA!!!
"Build me a grapple I don't have to work on,"
says Scott Sizemore, Certified Master Logger.
So we did.
The Talon Brush Grapple is contractor tested for reliability and ruggedness.
It is the only heavy-duty grapple where the back of the tines are enclosed so the operator can push trees thru chippers and not harm the loader tires.
Our hydraulic hoses are protected with wear guard covering and route immediately into cross tubing to prevent ruptures and tears. The loader hoses are spring held to keep them out of pinch points.
Forget cylinder damage. These cylinders are only on Ammbusher grapples and are fully enclosed.
| TALON SPECIFICATIONS | |||
| Overall Width | 63" | 72" | 81" |
| Overall Weight | 770 lbs. | 825 lbs. | 880 lbs. |
| Number of Grapple Teeth | 4 | 4 | 4 |
| Number of Cylinders | 2 | 2 | 2 |
| Tines & End Plates | 8 | 9 | 10 |
| Cylinder Bore | 2" | 2" | 2" |
| Cylinder Stroke | 10" | 10" | 10" |
| Cylinder Rod Diameter | 1.25" | 1.25" | 1.25" |
| Note: Standard hydraulic couplers & hoses are furnished with grapple. | |||
|
Iowa Farm Equipment Copyright © 2004 - 2008 by Iowa Farm Equipment |