Iowa Farm Equipment -- Baumalight Stump Grinders

| Home | Arbor, Forestry & Logging Equipment |

We ship nationwide affordably !

Baumalight Stump Grinders

$Call For Our "Below List Prices!"

Skid Steer Stump Grinders

PTO Stump Grinders

$Call For Our "Below List Prices!"

The S18 model uses no swing cylinder, flow goes directly to the motor for more torque and has no need for 12 volt DC power.
The S18 is mounted at 90°, bring visibility to 100%, and also has a fixed frame so the operator only needs to use controls that he used-to.

12-25 GPM
24" cutting wheel

S18 SPECIFICATIONS
Rotor Size	24"
Number of Teeth	34"
Cutting Teeth Construction	Carbide Steel Bolt-On
Cutting Wheel Speed	700 RPM
Cutting Height Above Ground	No Limit
Cutting Depth Below Ground	10"
Max Cutting Depth per Pass	5"
Max. Horizontal Cut	22"
Swing Arc	0^o
Hub Torque	250 ft.-lbs.
Over Torque Protection	Relieve Valve
Recommended HP Size	25 - 80 HP
Hitch	Quick Attach
Hydraulic GPM	12 - 25 GPM
# Of Remotes Required Hydraulic	1
Requires 12V DC	Yes
Unit Weight (shipping)	510 lbs.
Width (shipping)	48"
Length (shipping)	48"

Stump Size Chart
12 GPM	7"
15 GPM	14"
20 GPM	20"
25 GPM	24"

S24 & S28 Skid-Steer Grinders
The cutting wheel is powered by the hydraulic remotes on your Skid Steer and the swing cylinder is controlled with a 12v diverter valve. The off set rotor design for greater visibility and needle vale for precise swing control makes the S24 & S28 comfortable to operate. 34 teeth on a 24" cutter means less cutting for each tooth resulting in longer tooth life and smother cutting for less wear on your Skit Steer.

Units are shipped with standard skid steer quick attach, 12v cigarette light plug, and flat-face quick couplers. The floating deflector contains the chips and debris and can be swung completely out of the way to cut close to fences.

Grease zerks and replaceable brass bushings provided at major pivot points for extended service life. Heavy tooth population makes finer mulch and allows much smoother operation.

Baumalight Quick Attach S24 Stump Grinder

$Call For Our "Below List Prices!"

Ideal For Removing Hard Wood Stumps Up to 24"

STANDARD FEATURES

15 - 23 GPM (Works best from 20 - 23)
Cutting wheel is powered by the hydraulic remotes on skid steer & swing cylinder is controlled with a 12V diverter valve.
Offset rotor design for greater visibility.
36 teeth on a 24" wheel means less cutting for each tooth resulting in longer tooth life & smoother cutting for less wear on your skid steer.
Unit is shipped with standard skid steer quick attach, 12V cigarette light plug, and flat-face quick couplers.

S24 SPECIFICATIONS
Rotor Size	24"
Number of Teeth	36
Cutting Teeth Construction	Carbide Steel Bolt-On
Cutting Wheel Speed	700 RPM
Cutting Height Above Ground	No Limit
Cutting Depth Below Ground	10"
Max. Cutting Depth per Pass	6"
Max. Horizontal Cut	22"
Swing Arc	80^o
Hub Torque	250 ft./lbs.
Recommended HP Size	30 - 60 HP
Hitch	Quick Attach
Hydraulic GPM	15 - 23
Number of Remotes Required	1
Requires 12 Volt DC	yes
Unit Weight (Shipping)	850 lbs.
Width (Shipping)	48"
Length (Shipping)	56"

Baumalight Model S28 Stump Grinder

$Call For Our "Below List Prices!"

STANDARD FEATURES

23 to 35 GPM (Works Well From 25 - 35)
Cutting Wheel is Powered By the Hydraulic Remotes on Skid Steer & Swing Cylinder is Controlled with a 12V Diverter Valve.
Off Set Rotor Design For Greater Visibility.
36 Teeth on a 24" Wheel Means Less Cutting For Each Tooth Resulting in Longer Tooth Life & Smoother Cutting For Less Wear on Your Skid Steer.
Unit is Shipped with Standard Skid Steer Quick Attach, 12V Cigarette Light Plug, and Flat-Face Quick Couplers.

S28 SPECIFICATIONS
Rotor Size	24"
Number of Teeth	36
Cutting Teeth Construction	Carbide Steel Bolt-On
Cutting Wheel Speed	800 RPM
Cutting Height Above Ground	No Limit
Cutting Depth Below Ground	10"
Max. Cutting Depth Per Pass	6"
Max. Horizontal Cut	22"
Swing Arc	80^o
Hub Torque	803 ft.-lbs.
Recommended HP Size	30 - 60 HP
Hitch	Quick Attach
Hydraulic GPM	23 - 35
Number of Remotes Required	1
Requires 12 Volt DC	yes
Unit Weight (Shipping lbs.)	1,120 lbs.
Shipping Width	48"
Shipping Length	56"

3P24 & 3P34 Stump Grinders
The cutting wheel is powered by the PTO (540) on your tractor with the swing and lift cylinders activated by the standard remotes on the tractor as well. 34 teeth on a 24" cutter and 54 teeth on a 34" cutter means less cutting for each tooth resulting in longer tooth life and smother cutting for less wear on your tractor. Units are shipped standard with PTO shaft, CAT II, & standard quick couplers. The floating deflector contains the chips and debris and can be swung completely out of the way to cut close to fences. Grease zerks and replaceable brass bushings provided at major pivot points for extended service life. Heavy tooth population makes finer mulch and allows much smoother operation.

Baumalight Model 3P24 Stump Grinder

$Call For Our "Below List Prices!"

STANDARD FEATURES

Sure Foot Stabilizer For More Control.
Heavy Duty, Oil Bathed Gearbox Protected by Slip Clutch.
Swing Pin in Center of Frame For Better Visibility.
Heavy Tooth Population, Makes Finer Mulch & Allows For a Smoother Operation.
The Floating Deflector Contains the Chips & Debris and Can Be Swung Out of the Way to Cut Close to Fences.
Grease Zerks and Replaceable Brass Bushings Provided at Major Pivot Points for Extended Service Life.
Debris Shot Away From Operator for Safe Operation.

OPTIONAL

S1050 option, Splits one remote hydraulic into two controlled functions.

3P24 SPECIFICATIONS
Rotor Size	24"
Number of Teeth	36
Cutting Teeth Construction	Carbide Steel Bolt-On
Cutting Wheel Speed	810 RPM
Cutting Height Above Ground	18"
Cutting Depth Below Ground	8"
Max. Cutting Depth Per Pass	6"
Max. Horizontal Cut	22"
Swing Arc	65^o
Hub Torque	803 ft.-lbs.
Recommended HP Size	30-60 HP
Hitch	Cat I & II
Hydraulic GPM	5-20
Number of Remotes Required	2
Input Speed	540
Unit Shipping Weight	880 lbs.
Shipping Width	40"
Shipping Length	56"

Baumalight Model 3P34 Stump Grinder

$Call For Our "Below List Prices!"

STANDARD FEATURES

Sure Foot Stabilizer for More Control.
Heavy Duty, Oil Bathed Gearbox Protected by Slip Clutch.
Swing Pin in Center of Frame for Better Visibility.
Heavy Tooth Population, Makes Finer Mulch & Allows For a Smoother Operation.
The Floating Deflector Contains the Chips & Debris and Can Be Swing Out of the Way to Cut Close to Fences.
Grease Zerks and Replaceable Brass Bushings Provided at Major Pivot Points for Extended Service Life.
Debris Shot Away From Operator for Safe Operation.

OPTIONAL

S1050 option, Splits one remote hydraulic into two controlled functions.

3P34 SPECIFICATIONS
Rotor Size	34"
Number of Teeth	54
Cutting Teeth Construction	Carbide Steel Bolt-On
Cutting Wheel Speed	810 RPM
Cutting Height Above Ground	25"
Cutting Depth Below Ground	14"
Max. Cutting Depth Per Pass	9"
Max. Horizontal Cut	32"
Swing Arc	65^o
Hub Torque	803 ft.-lbs.
Recommended HP Size	45-90 HP
Hitch	Cat II
Hydraulic GPM	5-20
Number of Remotes Required	2
Requires 12 Volt DC	no
Input Speed	540
Unit Shipping Weight	1,320 lbs.
Shipping Width	48"
Shipping Length	78"

Iowa Farm Equipment
2491 122nd St.
Moscow, Iowa 52760
563-724-3500
sales@iowafarmequipment.com