Here's the machine the entire industry has been demanding - a 614cc chipper. The CH4614 is capable of devouring branches up to 4" inches in diameter through a wide hopper and chipper opening. We didn't stop there.

ECHO Bear Cat's 4" towable chipper comes with a standard 6" round discharge chute and adjustable deflector, rotating a full 360 degrees for exceptional accuracy when directing chips into a truck, trailer, or wagon.

Highway towable - with a 2" ball coupler, 44" wheel base and torsion suspension axle - the ECHO Bear Cat chipper is simple to operate, with a big 27" x 28" feed hopper and 5.5" x 7" chipper opening that defies small side limbs.

The Bear Cat CH45342 Yard-Towable Chipper has a 342cc Briggs & Stratton Electric Start OHV InTec Engine. This chipper features independent and adjustable axles that can be adjusted for confined spaces or extended for increased stability.

The Bear Cat CH45390 road towable chipper has a 390cc Honda OHV engine. Its heavy-duty axle with 4-bolt hub and 480/400 by 8" wheels and tires make this unit road towable.

This model is built with heavy-duty, 7-gauge chipper housing and trailer construction. It contains a double-banded belt drive and features a feed chute opening 13"x14.5". The 14"x1" think, 49 lb. dynamically-balanced disc with cantilever design reduces wrapping while utilizing two reversible chipper blades. Quick change hitch and axle can be changed to front or back of chipper allowing the chipper to be towed from either end. A hitch can be added to the rear of the chipper trailer for pulling an additional trailer. A 4.5" square optional discharge chute with deflector cap directs the chips and raises the discharge of chips into the trailer or back of a pickup.

For ease of use and rugged reliability, it's hard to beat these commercial grade, heavy-duty machines. Highway towable to your work site, you can select from self feed or hydraulic feed models.

Features include a 15 inch diameter feed roller containing 10 knife blades, four-reversible chipping blades, adjustable 4-sided anvil and an 8 inch round discharge chute.

The 30 inch diameter, 1.25 inch thick dynamically-balanced chipper disc weighs 275 pounds and produces tremendous chipping power.

Invest in the chipper that's loaded with new standard features to make your job easier. Our new breed of chipper can handle branches up to 6" in diameter, with the ability to chip the toughest brush with ease.

The 26"x1" thick, 165 lb. dynamically-balanced disc with cantilever design reduces wrapping while utilizing 4-reversible chipper blades, and adjustable 4-sided anvil.

Features, include a 6.7" rectangular discharge chute, a live hydraulic feed system with a variable speed feed roller with instant reverse. Our newly developed "try again" feed system automatically retries feeding limbs. The feed sensor is factory installed and standard equipment on these 6" chippers. The feed roller is 15" in diameter, containing 10 knife blades for enhanced powerful feeding. The discharge chute extends to the end of the hitch for efficient loading and quickly rotates 360 degrees with ease. The 6" chipper is available with a choice of gas or diesel engines. All models have a 6.5"x13.5" feed opening with a wide open feed chute measuring 36"x35".

The triple banded belt drive provides a better transfer of power. The Bearcat 6" Chipper also features a telescopic tongue with 2" ball coupler, torsion axle suspension, adjustable jack stand with wheel and adjustable rear stabilizer. The 60 " wide trailer is ideal for tight roads, storage and maneuverability.

Our latest chipper can handle branches up to 6 inches in diameter, with the ability to chip the toughest brush with ease. The 26 x 1 inch thick, 165 pound dynamically-balanced disc with cantilever design reduces wrapping while utilizing 4-reversible chipper blades, and an adjustable 4-sided anvil.

Our latest chipper can handle branches up to 6 inches in diameter, with the ability to chip the toughest brush with ease. The 26 x 1 inch thick, 165 pound dynamically-balanced disc with cantilever design reduces wrapping while utilizing 4-reversible chipper blades, and an adjustable 4-sided anvil.

The 8 inch turntable chippers from Bear Cat provide all the features you need to get your work done!

There isn't much that can stand up to the mighty Bear Cat 9" chippers. Based on solid 4" "C" channel frame with torsion axle suspension, these machines make branches and trees up to 9" in diameter disappear. Features include a 15" diameter feed roller containing 10 knife blades, four reversible chipping blades, adjustable 4-sided anvil and an 8" round discharge chute.

The 30" diameter, 1.25" think dynamically-balanced chipper disc weighs 275 lbs. and producing tremendous chipping power.

A triple banded belt drive generates positive power, and a hydrostatic feed control provides the operator with infinite feed settings for all types and sizes of debris. A telescoping tongue along with torsion axle suspension make towing easy. Service and maintenance is made easy by a hinged disc cover.

There isn't much that can stand up to the mighty Bearcat 9" chippers. Based on a solid 4" "C" channel frame with torsion axle suspension, these machines make branches and trees up to 9" in diameter disappear. Features include a 15" diameter feed roller containing 10 knife blades, four reversible chipping blades, adjustable 4-sided anvil and an 8" round discharge chute.

The 30" diameter, 1.25" thick dynamically-balanced chipper disc weighs 275 lbs. and producing tremendous chipping power.

A triple banded belt drive generates positive power, and a hydrostatic feed control provides the operator with infinite feed settings for all types and sizes of debris. A telescoping tongue along with torsion axle suspension make towing easy. Service and maintenance is made easy by a hinged disc cover.

Are you looking for a chipper to work like a beast? Bearcat's 12" chipper makes quick work of even the hardest wood and brush piles. Designed with the user in mind, the 12" chipper by Bear Cat works all day without wearing out your crew.

Standard features such as the 360 degree rotating discharge chute and adjustable deflector let you choose where the chips go. A factory standard flow control valve allows you to adjust chipping speed from 0-135 board feet per minute.