When a 4" or 5" PTO chipper is what you need Bear Cat has just the right machine for you. You choose the model based on your power requirements. If you have a utility tractor with a 540 RPM PTO, one of these is your pick.

Built Bearcat tough, yet compact in design, the 4" and 5" chippers will handle your debris recycling problems.

The Model CH4540 comes equipped with a 20"x1.25", 140 lbs. dynamically balanced steel disc with four reversible chipper blades, easy feeding with a big 27"x28" feed hopper and 5.5"x7" chipper opening that defies small side limbs, 360 degree rotating 6" discharge chute.

All models are built with heavy-duty, 7-gauge chipper housing and trailer construction. Each contains a double-banded belt drive and features a feed chute opening 13"x14.5". The 14"x1" think, 49 lb. dynamically-balanced disc with cantilever design reduces wrapping while utilizing two reversible chipper blades. A 4.5" square optional discharge chute with deflector cap directs the chips and raises the discharge of chips into the trailer or back of a pickup.

If you have more acreage, you need more power to keep up with tree clearing, trimming and debris handling. Which makes the 70554 the perfect machine for the job.

Bearcat's 125-pound balanced rotor and 4 reversible chipper blades have a well-deserved reputation for converting mounds of tree branches into mounds of mulch and compost material.

Whether you're loading leaves and debris down the 20"x30" hopper or feeding 5" branches and trees into the chipper chute, the 70554 chipper/shredder model with an optional 1-speed blower attachment will pile the material where you want it.

Because the optional blower discharge chute rotates a full 360 degrees and is equipped with an adjustable deflector cap, precision placement of wood chips can mean filling up a pickup box, trailer or wagon for quick clean up and less labor.

OPTIONS:

• One speed Blower With 4-Blade Fan; 4" Discharge Tube; Adjustable Cap (P/N 70487).
• Two speed Blower With 8-Blade Fan; 6" Discharge Tube; Adjustable Cap (P/N 71110).
• 8" Diameter, 20 foot Long Vacuum Hose Attachment.
• Works Exclusively With 71110 Blower.(P/N 71125)
• Leaf Tamper (P/N 70649)
• Wet Debris Screen (P/N 70559)
• 0.375 inch Screen (P/N 70703)
• 0.75 inch Screen (P/N 70531)

When a 5" PTO chipper is what you need Bearcat has just the right machine for you. You choose the model based on your power requirements. If you have a utility tractor with a 540 rpm PTO, one of these is your pick.

Built Bear Cat tough, yet compact in design, and 5" chippers will handle your debris recycling problems.

The Model CH5540H comes equipped with a 20"x1.25", 140 lb. dynamically balanced steel disc with four reversible chipper blades, easy feeding with a big 27"x28" feed hopper and 5.5"x7" chipper opening that defies small side limbs, 360 degree rotating 6" discharge chute.

Get the job done and into the truck quickly and easily with the 73554! Heavy-duty construction, the 73554 PTO 3 point hitch chipper/shredder weighs 720 lbs., this means years of dependable service. The double-banded belt drive gives a more positive transfer of power.

Power take offs on utility tractors have become a primary source for much of the work around farms, orchards, golf courses, etc. Any place where you need to turn a pile of branches into a pile of chips.

You choose - self feed or hydrostatic hydraulic feed for infinite feed settings - these chippers mount on your three point hitch and hook directly to the PTO for quick setup and power on demand.

Rotating 360 degrees, the 8" round discharge chute gives you accurate control over the flow of chips produced. The 30"x1" think, 275 lbs. dynamically-balanced disc, adjustable 4-sided anvil, four reversible chipper blades.

Power take offs on utility tractors have become a primary source for much of the work around farms, orchards, golf courses, etc. Any place where you need to turn a pile of branches into a pile of chips.

You choose - self feed or hydrostatic hydraulic feed for infinite feed settings - these chippers mount on your three point hitch and hook directly to the PTO for quick setup and power on demand.

Rotating 360 degrees, the 8" round discharge chute gives you accurate control over the flow of chips produced. The 30"x1" think, 275 lbs. dynamically-balanced disc, adjustable 4-sided anvil, four reversible chipper blades. The feed roller on Model 72854 is 15" in diameter, containing 10 knife blades for enhanced powerful feeding. A hydraulic jack is mounted on the hydraulic feed system for ease of maintenance. Plate steel construction means solid performance for hundreds of hours, and maintenance is enhanced by a hinged disc cover that provides wide open access to the chipper blades and disc.