Bearcat's line of skid steer chippers attach in seconds and are driven solely by your skid steer's hydraulics. They are available in standard/high-flow and high-flow models. Either model will make short work of any troublesome debris.

SKID STEER MOUNT

• CH500H (74500) Fits Skid Steers with Standard or High-Flow Hydraulics.
• CH800H (74800) Fits Skid Steers with High-Flow Hydraulics.
• Two Mounts, so Chipper can be Mounted with Feed Table Facing Forward or to the Curbside.
• Easy to Attach - Just Connect Chipper to the SAE J2513 Quick-Tach, Attach the Hydraulic Hoses and you are Ready to Go.

HYDRAULIC FEED

• Four-Position Manual Valve Control (Reverse-Neutral-Forward-Reverse).
• Infinite Speed Settings with Turn of a Handle.
• Automatic Feed Control, Which Slows the Feed Roller if the Disc Starts to Slow Down.

CHIPPER DISC

• CH500H (74500) has a 20" x 1.25", 140 lb. Machined Disc.
• CH800H (74800) has a 30" x 1.25", 275 lb. Machined & Balanced Disc.

FOUR CHIPPING BLADES

• Reversible Heat-Trained Chipper Steel Blades, with Chrome Content.
• Blades are Mounted 90^o to Each Other for Smoother Operation and Less Vibration.

FOUR EDGE ADJUSTABLE ANVIL/CUTTER BAR

• To Ensure Good Chipping Ability.

CONTINUOUS CHIPPING SIZE

• CH500H (74500) has a 5.5"x7" Chipper Opening for Side Limbs, and Will Chip up to 3" Limbs Continuously.
• CH800H (74800) has a 9"x9" Chipper Opening for Side Limbs, and Will Chip up to 5" Limbs Continuously.

EASY ACCESS DISC

• The Disc is Accessible Through the Hinged Disc Cover, which Exposes One Half of the Disc for Easy Access to the Chipping Blades and for Easy Clean Out.

INTEGRATED BLOWER

• Put the Chips Where You Want Them with the Dedicated Blower. 360^o Rotating, 6" (74500) or 8" (74800) Diameter Steel Tubing with Adjustable Deflector Cap Allows You to Put the Chips Where You Want Them the First Time.

HEAVY DUTY CONSTRUCTION

OTHER FEATURES:

• Slip-Resistant Step Pads for Entry or Exit from Skid Steer.
• Weatherproof Owner's Manual Box.