Iowa Farm Equipment -- Farm King Finishing Mowers

| Home | Farm King Mowers | Contact Us |

We ship nationwide affordably !

Farm King Finishing Mowers

Farm King has Been Building Top Quality Finishing Mowers for 15 Years and Has Refined These Mowers to be Among the Best in the Industry. Manufactured with Top Quality Material, the Edge of the Mower Deck Features Solid Reinforcing Rods. These Finishing Mowers are Quick Hitch Adaptable and are Available in Widths Ranging From 48" to 84", in Either Rear Discharge or Side Discharge Configurations.

Farm King Finishing Mowers are Built to be Durable and Long Lasting. Pneumatic Tires with Puncture Proof Sealant are Standard. Each Wheel Yoke Assembly Includes a Cutting Height Adjustment on the 1" Wheel Yoke Shaft. Bushings in the Wheel Hubs Ensure Long-Term Reliability Without Needing Frequent Lubrication. An Optional Front UHMW Roller Prevents Scalping. A Slide Adjustment is Located Under the Gearbox for Easy Belt Tensioning.

Each Mower Features Three High-Speed Blades with One of the Highest Rated Tip-Speeds in the Industry. This Creates Powerful Suction that Lifts the Grass for a Crisp Cut. A Blade Overlap of 1-5/8" to 2-5/8" Prevents Stripping and Ensures the Lawn is Mowed Evenly.

Designed and Built With What You're Looking For:

Side and Rear Discharge Models.
More Blade Overlap to Minimize Stripping.
Heavy Decks with Solid Reinforcing Rod Around the Edge.
Standard Pneumatic Tires with Puncture Proof Sealant.
Solid Rubber Tires Optional on 4', 5' and 6' Models.
Slide Adjustment of the Gearbox for Belt Tension.
Heavy Duty PTO Shafts are Optional on the 5' and 6' Models, Standard on the 7' Model.
Hard Surface Cutting Edges are Optional on the 4', 5' and 6' Models, Standard on the 7' Model.

Low Lift Blades Available with Hard Surfaced Cutting Edge for All Models.
Standard on All Models: Sealed Self Greasing Bearings.

Cast iron pulleys and double center drive pulley.

3" x 4" roller is standard on the
4' & 5' models.
4" x 5 3/8" roller is standard on the 6' & 7' models.
A solid reinforcing rod is around the bottom edge of the deck.

Optional 4" x 7" U.H.M.W. poly roller.

FARM KING FINISH MOWER SPECIFICATIONS
MODEL	Y450	Y550	Y650	Y750
Cutting Width	48"	60"	72"	84"
Cutting Height	1-1/2" to 4-1/2"
Blade Tip Speed	15,485 ft/min	15,829 ft/min	18,737 ft/min	18,552 ft/min
Blades	3
Blade Material	1/4" x 2-1/2" Alloy Hardened			1/4" x 3" Alloy Hardened
Blade Length	17-3/4"	21-3/4"	25-3/4"	29-3/4"
Blade Overlap	1-5/8"	2-5/8"
Blade Drive	2 Belt B Groove
Deck Material	10 Gauge	7 Gauge
Gearbox	Closed (540 RPM)
Gearbox Ratio	1:1.93
Tractor HP Requirement	12 - 25 HP	15 - 30 HP	20 - 40 HP	25 - 45 HP
3 Point Hitch	Cat. I
Tires	4.10 / 3.50 - 4			13 x 5.0 x 6
Spindles	Cast with Bearing
Front Roller	3" x 4"		4" x 5-3/8"
UHMW Poly Roller (Optional)	4" x 7"
Approx. Weight	440 lbs.	552 lbs.	618 lbs.	724 lbs.