Overall view including discharge chute from the 3-point hitch side.
Quick Hitch compatible 3 point hitch. Also visible is the tool-less hand-pin
(secured with lynch pin) for the hinged, pulley enclosure. Every GME has the fine
fabrication and assembly detail seen in this photo.
Notice the tool-less hand-pins (secured with lynch pins)
for quick and easy access to the rotor and pulley chambers.
Two overall views with feed hopper table extension closed.
Also visible is the hydraulic motor, valve, fluid filter and reservoir filler cap.
View with feed hopper table extension open.
Close-up and larger view of belt pulley, drive shaft & bearing cap, and rotor.
Again, note the excellent fabrication detail and quality, which is standard on all GME Products!
View with feed table extension open.
View of hydraulic system; motor hoses (with compressed fittings),
hydraulic controller, reservoir with filler cap and filter.
24" Diameter x 1-1/2" Thick Rotor - shown on the paddle side which accelerates the discharge of chips.
24" Diameter x 1-1/2" Thick Rotor & Knife.
View of hydraulically driven feeder from hopper.
Top view of hydraulically driven feeder from access chamber and same view with chamber cover on.