Iowa Farm Equipment -- H & S HDNR 7 + 4 Forage Boxes

We ship nationwide affordably !

H & S HDNR 7 + 4
Forage Boxes

$Call For Our "Below List Prices!"

The H & S HD 7 + 4 Front and Rear Unload Boxes have the option of being ordered with PTO Rear Drive or Hydraulic Rear Drive.

	Dual Belt Clutch Shields are removed to show the dual belt clutch which is the primary drive source. The emergency stop mechanism is built into the drive unit and can be activated from the front, sides or rear of the box. A separate clutch allows you to start and clear the beaters before you start the main apron conveyors. A simple trouble-free variable speed drive lets you match just the right unload speed to the crop type, load condition and blower capacity. Main apron unload rate is variable and ranges from 9" up to 11'6"/minute.
	3 - 18" 4 Bar HD Spiral Beaters H & S uses three - 18" 4 Bar HD Spiral Type Beaters - not Augers. Aggressive in handling tough material, they are even feeding. All three beaters are mounted in the head, not auxiliary panels in the box. Beater shafts are 1-1/4" equipped with greaseable bearings.
	Optional 12" Folding Cross Conveyor Extension An optional 12" Folding Cross Conveyor Extension can be ordered.
	Automatically Lock and Unlock Tailgate Once the tailgate safety lock is released, the self-locking mechanism unlocks automatically while unloading and locks shut when the tailgate closes.
	Cross Z-Iron All industrial forage boxes feature Cross Z-Iron. Cross Z's are welded to the side channels inline with stakes for added strength.
	Optional Front Hydraulic Drive All front unload boxes have a standard PTO drive while unloading off the front. Front hydraulic drive is optional.

SPECIFICATIONS
MODEL	FB74FR18HDNR	FB74FR20HDNR	FB74FR22HDNR
Inside Width	7'4"
Inside Height (Floor to Top of Side)	86"
Overall Length	21'3"	23'3"	25'3"
Overall Width	107"
Standard Box Overall Height	101"
Standard Box Capacity Struck Level	948 cu. ft.	1,054 cu. ft.	1,267 cu. ft.
Weight - Standard Box	6,655 lbs.	7,080 lbs.	7,530 lbs.
Apron Chain	667H Pintle Chain is Standard 667X Pintle is Optional		667X Pintle
Cross Feed	22" Wide - CA550 Chain with Welded Slats Right or Left Hand Discharge
Unloading Beaters	3 - 18" - 4 Bar Spiral - Even Feed
Main Apron Speed	Variable Speed Drive - 12 Unload Speeds - Unload Rate - 9" Per Min. up to 11'6" Per Min.
Drive Sequence	Bronze Worm Gear Box - #80 Roller Chain - 1-3/4" Main Apron Drive Shaft
Power Source	540 PTO or Hydraulic Drive
Emergency Stop Clutch	Standard
Rear Unload Drive	Choice of Hydraulic Drive or PTO Drive
Rear Unload Speed	Unload Time is Dependent on Tractor RPM, Hydraulic Pressure and GPM
Rear Endgate	Automatic Lock and Unlock
Transport Lights and Hold-Down Kits	Standard

WARRANTY: SEE OERATORS MANUAL FOR WARRANTY DETAILS AND LIMITATIONS. H&S RESERVES THE RIGHT TO CHANGE ITS PRODUCTS OR THE DESCRIPTION AT ANY TIME WITHOUT NOTICE OR OBLIGATION. MODELS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

Iowa Farm Equipment
2491 122nd St.
Moscow, Iowa 52760
563-724-3500
sales@iowafarmequipment.com