H & S Feeder Box
$Call For Our "Below List Prices!"
The H & S 7+4 Feeder Box is available in either front unload or front and rear unload.
| | Home | Feeder Wagons & Feed Mills | H & S Feeder Wagons | |
|
H & S Feeder Box $Call For Our "Below List Prices!"
The H & S 7+4 Feeder Box is available in either front unload or front and rear unload. |
|
|
Picture left shows feeder elevator in the level unloading position to illustrate reach from side of box. |
|
|
The H & S Feeder Box is mounted on a 12 Ton oscillating tandem trailer with 12.5L x 15 tires. Equipped with a swing away jack. Truck mount is optional. |
|
|
Shown left is the very simple, easy to operate electric control that mounts on the tractor or in the truck cab. |
| FEED BOX SPECIFICATIONS | |||
| Power | Hydraulic Drive | ||
| Hydraulic Requirements | 2000 PSI, 10 GPM | ||
| Power Apron Drive | Worm Gear Bronze | ||
| Speeds | Infinite Variable | ||
| Main Aprons | 4 Chains - 667H Pintle | ||
| Beaters | 2-18" Diameter, 4 Spiral Bar | ||
| Beater Drive | #50 Roller Chain | ||
| Cross Conveyor | #550 Roller Chain or Angle Cross Slats | ||
| Cross Conveyor Drive | Sprocket and #50 Roller Chain | ||
| Cross Conveyor Width | 22" | ||
| Discharge | Left Side Unloading Elevator | ||
| Discharge Opening | 533 Sq. In. | ||
| Discharge Height | Minimum - 33" Maximum - 39" |
||
| Inside Length | 16' | ||
| Indside Width | 7'4" | ||
| Indside Height | 48" | ||
| Capacity | Struck Level - 454 Cu. Ft. - By Weight 20,000 lbs. | ||
| Overall Length | 23'7" | ||
| Overall Width | Conveyor Up - 9'8" Conveyor Down - 12'4" |
||
| Overall Height (Loading Height) | 8'2" | ||
| Weight | 5,570 lbs. | ||
| Sides and Floor Inside Box | 3/4" Plywood-Poly Bonded to Plywood | ||
| Tires | 12.5L x 15, Tandem | ||
| Rub Rail - Wood/Emergency Stop | Standard | ||
| Hwy. Light Pkg./Elec. Controls | Standard | ||
| Emergency Stop Mechanism | Standard | ||
| Electric Controls | Standard | ||
| Truck Mount | Optional | ||
| Height from Bottom of Frame to Top of Box | 69" | ||
| Recommended Truck Cab to Center of Axle Min. | 150" | ||
SEE OPERATORS MANUAL FOR WARRANTY DETAILS AND LIMITATIONS. H&S RESERVES THE RIGHT TO CHANGE ITS PRODUCTS OR THE DESCRIPTION AT ANY TIME WITHOUT NOTICE OR OBLIGATION. MODELS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITH OUT PRIOR NOTICE.
|
Iowa Farm Equipment Copyright © 2004 - 2008 by Iowa Farm Equipment |
