Iowa Farm Equipment -- H & S HDX-14 Hay Rake

We ship nationwide affordably !

H & S HDX-14 Hay Rake

$Call For Our "Below List Prices!"

The H & S HDX Series Rakes feature a highly maneuverable short turning radius, no caster wheel design, and an overhead frame design for high volume capacity of crop.

	Two Turnbuckle Adjustments (B) on the support rods of each rake beam adjust to keep the rake beam level.
	Each rake beam adjstment (A) for the rake wheel ground pressure allowing the operator to fine tuen for various conditions.
	A five position manual adjustment beam angle is standard equipment.
	Like all H & S Rakes, the HDX-Series Rakes have a proven ground pressure system and rake arm design. All models of the HDX Series Rakes also feature one side raking with either side.
	The variable main frame width adjustment open symmetrically. Hitch height and beam fore and aft tilt are easily controlled by a ratchet jack (C).
	Tandem 6.70 x 15 Tires with Rims (D) are standard equipment. The optional Hydraulic Beam Angle Kit (E) adjusts right and left beam angles.
	Toggle Switch up adjusts left beam angle. Toggle Switch neutral adjusts main frame width. Toggle Switch down adjusts right beam angle.
	Optional Rake Wheel Wind Boards help to keep the crop from wrapping on the rake wheels.
	HDX-Rake Configurations. HDX-2 - 2 Wheel Front Extension. HDX-3 - 3 Wheel Right Rear Extension. HDX-14 - 14 Wheel V-Style Rake. (Base Rake) HDX-16 - 16 Wheel V-Style Rake. HDX-17 - 17 Wheel Y-Style Rake. HDX-19 - 19 Wheel Y-Style Rake.

HDX-14 HAY RAKE SPECIFICATIONS
Wheel Diameter	60"
Teeth per Wheel	40
Tooth Diameter	7.0 mm (.275")
Transport Width	12'5"
Transport Length	26'5"
Windrow Width Adjustment	Up to 94"
Raking Width	Up to 31'
Raking Wheel Hubs	Tapered Roller Bearings
Hitch Jack	Standard
Standard Transport Wheels	(4 - Tandem) 6.70 x 15
Weight	4,140 lbs.
Rake Wheel Wind Guards	Optional
Transport/Work Lights	Optional
Hydraulic Requirements	1 Double Acting Remote for Main Frame Open and Close 1 Single Acting Remote for Rake Wheel Lift
Electrical Requirements	Plus 12 Volt Power Source if Rake is Equipped with the Hydraulic Beam Angle Kit.

WARRANTY: SEE OPERATORS MANUAL FOR WARRANTY DETAILS AND LIMITATIONS. H&S RESERVES THE RIGHT TO CHANGE ITS PRODUCTS OR THE DESCRIPTION AT ANY TIME WITHOUT NOTICE OR OBLIGATION. MODELS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.