Iowa Farm Equipment -- H & S HD 7 + 4 Forage Boxes

We ship nationwide affordably !

H & S HD 7 + 4 Forage Boxes

$Call For Our "Below List Prices!"

The H & S HD 7+4 Forage Boxes provide even feeding, with their spiral type beaters are aggressive in handling tough material. All H & S Forage Boxes are built to last.

	Deep Stagger Beater Design H & S utilizes a deep stagger beater design. The beaters turn progressively faster from top to bottom. The slow turning top beater does not pitch chunks forward, it undercuts the heap and feeds tough material down where the bottom beaters go to work delivering a smooth even flow to the X-Conveyor. The cross conveyor is 22" wide and is equipped with 550 roller chain. The X-Conveyor extends 12" beyond the side of the head.
	3 - 18" 4 Bar HD Spiral Type Beaters H & S uses three - 18" 4 Bar HD Spiral Type Beaters - not Augers. Aggressive in handling tough material, they are even feeding. All three beaters are mounted in the head, not auxiliary panels in the box. Beater shafts are 1-1/4" equipped with greaseable bearings.
	Optional 12" Folding Cross Conveyor An optional 12" Folding Cross Conveyor Extension is available for the 14' apron unload model.
	Simple Trouble-Free Variable Speed Drive A simple trouble-free variable speed drive lets you match just the right unload speed to the crop type, load condition and blower capacity. A bronze worm gear is standard. #80 Drive chain drives the main apron drive shaft. The main apron drive shaft is 1-3/4" stress proof shafting. Main apron unload rate is variable and ranges from 9" up to 12'6" per minute.
	Separate Clutch A separate clutch allows you to start and clear the beaters before you start the main apron conveyors. The HD Clutch can be used to engage just the cross conveyor, the cross conveyor and beaters, or the cross conveyor, beaters and main floor apron in any speed.
	Dual Belt Clutch Shields are removed to show the dual belt clutch which is the primary drive source. The emergency stop mechanism is built into the drive unit and can be activated from the front, sides or rear of the box.
	Steel-Welded Subframe H & S Boxes have an all steel-welded subframe.
	Transport Lights Standard Transport Lights are standard on all H & S Boxes. This is the light configuration on the front unload boxes.
	Optional Front Hydraulic Drive All front unload boxes have a standard PTO Drive while unloading off the front. Front hydraulic drive is optional.

SPECIFICATIONS
MODEL	FB7414	FB7416	FB7418	FB7420	FB7422
Capacity with Roof - ASAE Standard	723 ft-3	831 ft-3	982 ft-3	1,095 ft-3	---
Inside Width	7'4"
Inside Height (Floor to Roof)	93"		97"
Overall Length	17'3"	19'3"	21'3"	23'3"	---
Overall Width	107"
Overall Height (Bolster to Roof)	114"		118"
Weight	3,850 lbs.	4,250 lbs.	4,650 lbs.	5,050 lbs.	---
T-Rod Main Apron Chain (Standard) 667H Pintle Chain	4 - 16,000# Tensile - 65,000# Combined Tensile 4 - 10,000# Tensile - 40,000# Combined Tensile
Cross Feed - HD 7+4	22" Wide - CA550 Chain with Welded Slats Right or Left Hand Discharge
Unloading Beaters	3 - 18" - 4 Bar Spiral - Even Feed
Main Apron Speed	Variable Speed Drive - Unload Rate - 9" Per Min. up to 12'6" Per Min.
Drive Sequence	Durst A110 Bronze Worm Gear Box - 80# Roller Chain - 1-3/4" Stress Proof Main Apron Drive Shaft
Power Source	540 PTO or Hydraulic Drive
Emergency Stop Clutch	Standard
Options	12" Folding Bunk Extension
Transport Lights / Hold Down Kits	Standard

WARRANTY: SEE OPERATORS MANUAL FOR WARRANTY DETAILS AND LIMITATIONS. H&S RESERVES THE RIGHT TO CHANGE ITS PRODUCTS OR THE DESCRIPTION AT ANY TIME WITHOUT NOTICE OR OBLIGATION. MODELS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

Iowa Farm Equipment
2491 122nd St.
Moscow, Iowa 52760
563-724-3500
sales@iowafarmequipment.com