Iowa Farm Equipment -- H & S HD Twin Auger Forage Boxes

We ship nationwide affordably !

H & S HD Twin Auger
Forage Boxes

$Call For Our "Below List Prices!"

The HD Twin Auger, 14' Forage Box Utilizes 2 High Speed Cross Augers. The twin auger extends beyond the side of the head to eliminate spillage. You can always depend on H & S Forage Boxes.

	3 - 18" 4 Bar HD Spiral Type Beaters H & S uses three - 18" 4 Bar HD Spiral Type Beaters - not Augers. Aggressive in handling tough material, they are even feeding. All three beaters are mounted in the head, not auxiliary panels in the box. Beater shafts are 1-1/4" equipped with greaseable bearings.
	Simple Trouble-Free Variable Speed Drive A simple trouble-free variable speed drive lets you match just the right unload speed to the crop type, load condition and blower capacity. A bronze worm gear is standard. #80 Drive chain drives the main apron drive shaft. The main apron drive shaft is 1-3/4" stress proof shafting. Main apron unload rate is variable and ranges from 9" up to 12'6" per minute.
	Clear Beaters Before You Start Main Apron A separate clutch allows you to start and clear the beaters before you start the main apron conveyors. The HD Clutch can be used to engage just the cross conveyor, the cross conveyor and beaters, or the cross conveyor, beaters and main floor apron in any speed.
	Dual Belt Clutch Shields are removed to show the dual belt clutch which is the primary drive source. The emergency stop mechanism is built into the drive unit and can be activated from the front, sides or rear of the box.
	10" High Speed Cross Augers The Twin Auger uitilizes two - 10" High Speed Cross Augers equipped with hold-downs and wipers. The auger housings are poly-lined to reduce build-up.
	Eliminate Spillage The Twin Augers extend 11" beyond the side of the head. A built-in auger extension is standard and eliminates spillage between box and blower.
	Steel-Welded Subframe H & S Boxes have an all steel-welded subframe.
	Transport Lights Standard Transport Lights are standard on all H & S Boxes. This is the light configuration on the front unload boxes.
	Optional Front Hydraulic Drive All front unload boxes have a standard PTO Drive while unloading off the front. Front hydraulic drive is optional.

SPECIFICATIONS
MODEL	FBTA14	FBTA16	FBTA18	FBTA20	FBTA22
Capacity with Roof - ASAE Standard	723 ft-3	831 ft-3	982 ft-3	1,095 ft-3	---
Inside Width	7'4"
Inside Height (Floor to Roof)	93"		97"
Overall Length	23'3"	19'3"	21'3"	23'3"	---
Overall Width	107"
Overall Height (Bolster to Roof)	114"		118"
Weight	3,900 lbs.	4,300 lbs.	4,700 lbs.	5,100 lbs.	---
T-Rod Main Apron Chain (Standard) 667H Pintle Chain	4 - 16,000# Tensile - 65,000# Combined Tensile 4 - 10,000# Tensile - 40,000# Combined Tensile
Cross Feed - HD Twin Auger	2 - 10" Side by Side Augers - with Adjustable Hold-Downs
Unloading Beaters	3 - 18" - 4 Bar Spiral - Even Feed
Main Apron Speed	Variable Speed Drive - Unload Rate - 9" Per Min. up to 12'6" Per Min.
Drive Sequence	Durst A110 Bronze Worm Gear Box - 80# Roller Chain - 1-3/4" Stress Proof Main Apron Drive Shaft
Power Source	540 PTO or Hydraulic Drive
Emergency Stop Clutch	Standard
Options	12" Folding Bunk Extension
Transport Lights / Hold Down Kits	Standard

WARRANTY: SEE OPERATORS MANUAL FOR WARRANTY DETAILS AND LIMITATIONS. H&S RESERVES THE RIGHT TO CHANGE ITS PRODUCTS OR THE DESCRIPTION AT ANY TIME WITHOUT NOTICE OR OBLIGATION. MODELS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

Iowa Farm Equipment
2491 122nd St.
Moscow, Iowa 52760
563-724-3500
sales@iowafarmequipment.com