|
Model 3 Pt. 15
The model 3-PT 15 3-Point ditcher is designed to provide an economical way to make surface drainage ditches using your own farm tractor. Like all the Hurricane 3-Point models, the 3-PT 15 is equipped with parking stands for easy hook-up and disconnection. It can be used with Cat II or III quick hitch by moving the bushings to the desired location.
The 3-PT 15 has a 15" 5-paddle impeller (digging wheel) with hard-surface paddles that are designed to be resurfaced as they wear. An optional ripper tooth is available for running in extremely hard or rocky conditions.
The rear shoe (or dragplate) gives the machine stability, helps prevent gouging and helps form the ditch in loose or wet conditions. An adjusting screw is provided.
Has longer gear box than comparable 3-point ditchers which enables it to reach greater depths when digging.
Optional for the 3PT15: 20" impeller with 6 paddles.
|
| SPECIFICATIONS |
| PTO |
1000 RPM with shear bolts |
| Gearbox |
5/16" material with double 80 roller chain, oil bath, external idler tension adjustment |
| Impeller Wheel |
15" diameter, 5 paddles |
| Hitch |
Cat. II or III: Quick Hitch Adaptable |
| Weight |
Approx. 800 lbs. |
| HP Required |
Min. 50 HP |
| PTO DETAILS |
| Standard |
1-3/8-21 spline, 1000 RPM |
| Optional |
1-3/4-20 spline, 1000 RPM |
| Optional |
1-3/8-6 spline, 540 RPM |
|
Model 3 Pt. 20
The model 3-PT 20 3-Point ditcher is designed to provide an economical way to make surface drainage ditches using your own farm tractor. Like all the Hurricane 3-Point models, the 3-PT 20 is equipped with parking stands for easy hook-up and disconnection. It can be used with Cat II or III quick hitch by moving the bushings to the desired location.
The standard 6-paddle wheel on the 3-Pt 20 is ideal for running in extremely trashy or wet conditions. The 6-paddle wheel can be used in any soil condition. This wheel is used without the cutting edge and is equipped with 6 paddles to provide smooth soil cutting operation. An optional ripper tooth is available for running in extremely hard or rocky conditions.
The rear shoe (or dragplate) gives the machine stability, helps prevent gouging and helps form the ditch in loose or wet conditions. An adjusting screw is provided.
Has a longer gear box than comparable 3-point ditchers which enables it to reach greater depths when digging.
An optional 18" cutting edge is available with shear bolts, 20" impeller and 4 replaceable hardened paddles with shear bolts. The cutting edge slices soil loose, reducing shock and vibration on moving parts, maximizing machine life. It also allows for multiple passes to widen or slope your ditch.
|
| SPECIFICATIONS |
| PTO |
1000 RPM with shear bolts |
| Gearbox |
5/16" material with double 80 roller chain, oil bath, external idler tension adjustment |
| Impeller Wheel |
20" diameter, 6 paddles |
| Hitch |
Cat. II or III: Quick Hitch Adaptable |
| Weight |
Approx. 800 lbs. |
| HP Required |
Min. 60 HP |
| PTO DETAILS |
| Standard |
1-3/8-21 spline, 1000 RPM |
| Optional |
1-3/4-20 spline, 1000 RPM |
| Optional |
1-3/8-6 spline, 540 RPM |
|
Model 3 Pt. 26
The model 3-PT 26 3-Point ditcher is designed to provide an economical way to make surface drainage ditches using your own farm tractor. Like all the Hurricane 3-Point models, the 3-PT 26 is equipped with parking stands for easy hook-up and disconnection. It can be used with Cat II or III quick hitch by moving the bushings to the desired location.
The 3-PT 26 has a 5-paddle impeller (digging wheel) with hard-surface paddles that are designed to be resurfaced as they wear. To protect it from damage when larger objects are hit, the 3-PT 26 has a shear bolt in the 26" wheel. An optional ripper tooth is available for running in extremely hard or rocky conditions.
The rear shoe (or dragplate) gives the machine stability, helps prevent gouging and helps form the ditch in loose or wet conditions. An adjusting screw is provided.
Has a longer gear box than comparable 3-point ditchers which enables it to reach greater depths when digging.
|
| SPECIFICATIONS |
| PTO |
1000 RPM with shear bolts |
| Gearbox |
4/16" material with double 80 roller chain, oil bath, external idler tension adjustment |
| Impeller Wheel |
26" diameter, 5 paddles |
| Hitch |
Cat. II or III: Quick Hitch Adaptable |
| Weight |
Approx. 800 lbs. |
| HP Required |
Min. 70 HP |
| PTO DETAILS |
| Standard |
1-3/8-21 spline, 1000 RPM |
| Optional |
1-3/4-20 spline, 1000 RPM |
|
The Swinger
The "SWINGER" is a 3-Pt. hitch mounted machine designed to be used as an offset ditcher. It can be operated behind either tractor tire or any position in between. This ditcher accommodates any tractor with 80-140 H.P., 540 or 1000 RPM PTO and one hydraulic outlet. Like all the Hurricane 3-Point models, the "SWINGER" is equipped with parking stands for easy hook-up and disconnection. It can be used with Cat II or III hitch.
An 8" stroke cylinder and a 50 degree constant velocity (CV) joint provide the ditcher's "SWINGING" action.
The "SWINGER" has a 20" 6-paddle impeller (digging wheel) with hard-surface paddles that are designed to be resurfaced as they wear. For smaller applications, this standard wheel can be replaced with a 15" 5-paddle wheel.
The rear shoe (or dragplate) gives the machine stability, helps prevent gouging and helps form the ditch in loose or wet conditions. An adjusting screw is provided.
Has longer gear box than comparable 3-point ditchers which enables it to reach greater depths when digging.
|
| SPECIFICATIONS |
| PTO |
1000 RPM with shear bolts |
| Gearbox |
5/16" material with double 80 roller chain, oil bath, external idler tension adjustment |
| Wheel |
20" diameter (15" optional) |
| Hitch |
Cat. II or III |
| Weight |
Approx. 1,350 lbs. |
| HP Required |
80 - 140 HP |
| PTO DETAILS |
| Standard |
1-3/8-21 spline, 1000 RPM |
| Optional |
1-3/4-20 spline, 1000 RPM |
| Optional |
1-3/8-6 spline, 540 RPM |
|
Model 24
The Model 24 Pull-type Ditcher / Terracer provides an efficient way to clean waterways, dig drainage ditches, spread drilling mud, and clean small road ditches.
The Model 24 has a 4-paddle, 36 inch diameter impeller (digging wheel) combined with a 24 inch cutting edge.
Optional Terracing Shield: The terracing option consists of a hydraulically operated deflector shield.
This allows you to control the direction and distance that the redistributed soil is thrown. Use this additional flexibility to build or rebuild terraces and waterways.
|
| SPECIFICATIONS |
| Impeller Wheel |
36" diameter, 4 paddles |
| HP Required |
100 - 140 HP |
|
Original Side - Arm
The Original (Large) Hurricane Side-Arm Ditcher is designed to clean & maintain roadside ditches, irrigation ditches and drainage ditches that cannot be safely straddled with other ditching equipment.
Hurricane Ditcher makes three models of side-arm ditcher, the original Side-Arm and the Baby Side-Arm, designed to clean and maintain road, irrigation, and drainage ditches and the Ditch Angel™, designed exclusively for roadside maintenance.
|
| SPECIFICATIONS |
| Impeller Wheel |
42" diameter, 9 paddles |
| Hitch |
Cat III: Quick Hitch adaptable |
| HP Required |
150 - 250 HP |
|
The Baby Hurricane Side - Arm
The Baby (Small) Hurricane Side-Arm Ditcher is designed to clean & maintain roadside ditches, irrigation ditches and drainage ditches that cannot be safely straddled with other ditching equipment.
Wheels are optional on the "Baby" Side-Arm Model.
Hurricane Ditcher makes three models of side-arm ditcher, the original Side-Arm and the Baby Side-Arm, designed to clean and maintain road, irrigation, and drainage ditches and the Ditch Angel™, designed exclusively for roadside maintenance.
|
| SPECIFICATIONS |
| Impeller Wheel |
26" diameter, 5 paddles |
| Hitch |
Cat II or Cat III: Quick Hitch adaptable |
| HP Required |
90 - 150 HP |
|
The Ditch Angel
The The Ditch Angel™ combination side-arm ditcher and mower is designed exclusively for roadside maintenance.
It comes equipped with a 26" ditching wheel or 5' brush mower.
The ditcher operates in dry or wet conditions, blowing soil 30-50' out the right side of the machine. A deflector is standard to keep material diverted away from machine and operator. The pre-hardened impeller paddles are designed to be hard surfaced or carbited as they wear. It is capable of cleaning 1 mile of ditch, 10" deep every hour!
The brush mower can be operated in many positions thanks to hydraulics and the unique design of the Ditch Angel™. The operator can change the position of the mower from inside the cab of the tractor to easily mow inside banks, outside banks and even up in trees. The Hurricane Brush Mower was designed to cut brush up to 2 ½ " in diameter. A sliding door, standard on the Hurricane Brush Mower, extends this to allow trees a full 4" in diameter to be easily cut.Safety screens are recommended for the operating tractor when using the Hurricane Brush Mower on the Ditch Angel™.)
The machine can reach 14' out to the side from the center of the machine and 14' above the ground surface thanks to the adjustable counter balance weight. A set of crazy wheels are optional for the Ditch Angel™ to support the weight and add stability.
Hurricane Ditcher makes three models of side-arm ditcher, the original Side-Arm and the Baby Side-Arm, designed to clean and maintain road, irrigation, and drainage ditches and the Ditch Angel™, designed exclusively for roadside maintenance.
|
| SPECIFICATIONS |
| PTO |
1000 RPM with shear bolt (Requires 2-3 sets of hydraulic outlets to operate) |
| Gearbox |
Reversible with double 80 roller chain |
| Impeller Wheel |
26" diameter, 5 paddles |
| Hitch |
Cat II or Cat III: Quick Hitch adaptable |
| Weight |
w/ditcher: approx. 4900 lbs.
w/cutter: approx. 5400 lbs. |
| HP Required |
90 HP |
Iowa Farm Equipment
2491 122nd St.
Moscow, Iowa 52760
563-724-3500
sales@iowafarmequipment.com
Copyright © 2004 - 2009 by Iowa Farm Equipment
|
| | | | | | | |
