Pilot Auger Attachment
The Pilot Auger is ideal for hard pan ground. Auger and Tip sold separately.
Illustrated is a side mounted S3 King Hitter with Pilot Auger attachment.
Complete with both hydraulic top link and hydraulic 18" (460mm) movement side shift adjustment.
Now Available to fit Series II
Rock Spike Extractor
Prior to ‘Posting’ the King Hitter Rock Spike Kit fitted to your King Hitter is designed to penetrate hard pan, concrete and frozen ground with a high tensile steel spike.
Spike diameters range from 65mm to 130mm. The spike is driven with a minimum 1100 lbs of down pressure, pending spike diameter. This is calculated to penetrate most surfaces without damage to the spike.
The kit incorporates a ‘Spike Extractor’, which transfers up to eight tons of lifting force to extract the spike. This will leave a neat pilot hole ready for either the Pilot Auger or the ‘post’ to be fitted into position.
The best all round option is to order your Pilot Auger and Rock Spike Extractor as a ‘Auger/Spike Combo’ Kit. This should take care of any eventuality.
Illustration is of a rear mounted King Hitterr (Series II Deluxe) complete with hydraulic top link and hydraulic angular adjustment.
Rock Spike in traveling position.
Rock Spike / Auger Combo
Pilot Auger Attachment - Relates to Series 2 & 3
Picture shows the Rock Spike Combo Kit using the downward force of the Rock Spike Extractor Kit.
Road Marker T-Post Warratah Holder
Warratah & Road Marker Post Holder.
Prevents Light Posts and Road Markers from buckling under impact.
Optional Guard
This quickly installed Protection Guard gives you piece of mind Total safety, by removing the possibility of hands slipping under the hammer or splinters flying into your person.
PTO Kit Pump and Reservoir Kit (Series I, II, III)
Ideal for users who's controlling machinery has insufficient hydraulic pressure or flow rate. Connect direct to the PTO output shaft. Available for tractors which do not have hydraulic flows or enough pressure.
Safety Post "Post Cap"
This valuable accessory is used to protect the Operator, the Driver, the Post and the Spike from possible damage through continual thumping of the weight.
Control Valve Setup
Compatible with almost any tractor, the hydraulics Control Valve setup can be easily changed to the individual settings required.
Hinged Mast
This optional versatile adaptation makes the King Hitter an even more useful machine in height restricted areas. Ideal for transportation where overhead cables are a problem.
Now standard on most Series III Export machines.
Extension Bracket
Connects to the top arm and can give some tractors the ability to Extend the back tilting ability for some tractors by 4"(100mm).
BOBCAT or 'Skid Steer' Mounting Bracket Attachment
This special attachment allows 'King Hitter' to mount directly onto any Bobcat or Skid Steer models.
Side Shift Kit
Your Series II Deluxe King Hitter mounts straight on to a series II base.
On the Series II this feature allows accurate placing of posts without unnecessary tractor movements with 8"(200mm)
side adjustment.
- 900 mm SideShift
- Includes Large Removable Storage Box
- Tow Bar mounting
- Spade Holder
- Jenny Holder
Digger Hitch Bracket
Enables the Kinghitter series 2 to be adapted to fit backhoe or diggers (specifications to be discussed with dealer before fitting hitch bracket)
