Iowa Farm Equipment -- Rhino Post-Hole Diggers

| Home | Post Drivers & Post-Hole Diggers |

Rhino Post-Hole Diggers

Rhino offers both mechanical drive and hydraulic drive post hole diggers to fit most landscaping, farming, or ranching applications. Planetary drive diggers are also available for industrial type applications. A selection of augers varying in size from 6" diameter up to 36" diameter(dependent on model) are available.

Rhino EPHD Post-Hole Digger

$Call For Our "Below List Prices!"

For agricultural, commercial, or industrial applications, Rhino offers a Post Hole Digger that's right for you.

The EPHD is designed for use on CAT I tractors up to 40 HP. Features include shear bolt driveline protection, a three year limited gearbox warranty, and a choice of 6", 9", or 12" auger. A fully shielded gearbox and driveline are standard for greater safety.
The maximum operating PTO speed of all Rhino post hole diggers should not exceed 300 RPM.

Specifications
Hitch Pins	CAT I
Yoke Tubing	2-7/8"
Boom Tubing	2-7/8"
Auger Length	42"
540 RPM*	Std.
Cat 2 Driveline (Shielded)	Std.
2" Output Shaft (Shielded)	Std.
Gearbox Warranty	3 Years
Gearbox (Ratio/Weight)	3:1 (45 Lbs.)

Extra Equipment	Optional Equipment
7" or 14" Auger Extensions	6", 9", or 12" Auger
Auger Adapter (to adapt Rhino Auger to a 2-9/16" output shaft)
Display Stand
Guide Handle

Rhino H200 Post-Hole Digger

$Call For Our "Below List Prices!"

Photo of the H200 post-hole digger mounted on a 3-point was not available, so this skid steer photo was used - but it is the same digger except for the attachment.

The Rhino Planetary Drive Digger is built to deliver outstanding performance in many industrial, commercial, or extreme agricultural applications including digging in soil, loose or solid rock, and concrete.
Mount kits are available to mount to most skid steer loaders, front-end loader buckets, backhoes, and small excavators. Depending on series, industrial-type augers are available in sizes from 2"-36" diameter to fit a wide range of applications. Flighting is a minimum 3/8" thick for excellent strength. A unique flange-mounted output shaft is designed to make repairs quicker and easier compared to competitive planetary diggers. A 2" solid steel swivel with 1-1/4" pins to withstand extreme loads is standard. The dual swivel action and the weight of the planetary drive and auger cause the auger to hang straight down.

Specifications
Output Shaft	2" Hex
Digging Depth	48"
Hitch Mounts	Skid Steer Loaders, Front End Loader Bucket, Backhoes, Small Excavators
Auger Flighting Thickness	3/8"
Drive Motors	Systems Delivering 10-20 GPM at 3000 PSI Max; 2008 ft. lbs. Torque at 3000 PSI
Auger RPM	10 GPM 48 RPM; 20 GPM 92 RPM
Recommended Max. Diameter Auger	Rock 24"; Dirt 30"

Optional Equipment

Puff Auger, SDA Augers, RSA Augers, SRA Augers, RAD Augers

18", 24", and 36" Tree Augers

Skid Steer Loader, Front Loader Bucket, Backhoe, and Small Excavator Mount Kits

24" to 72" Variable Length Auger Extensions

Rhino H300 Post-Hole Digger

$Call For Our "Below List Prices!"

Photo of the H200 post-hole digger mounted on a 3-point was not available, so this skid steer photo was used - but it is the same digger except for the attachment.

Specifications
Output Shaft	2" Hex
Digging Depth	48"
Hitch Mounts	Skid Steer Loaders, Front End Loader Bucket, Backhoes, Small Excavators
Auger Flighting Thickness	3/8"
Drive Motors	Systems Delivering 15-30 GPM at 3000 PSI Max; 2937 ft. lbs. Torque at 3000 PSI
Auger RPM	15 GPM 47 RPM; 30 GPM 94 RPM
Recommended Max. Diameter Auger	Rock 36"; Dirt 36"

Optional Equipment

Puff Auger, SDA Augers, RSA Augers, SRA Augers, RAD Augers

18", 24", and 36" Tree Augers

Skid Steer Loader, Front Loader Bucket, Backhoe, and Small Excavator Mount Kits

24" to 72" Variable Length Auger Extensions

Rhino H350 Post-Hole Digger

$Call For Our "Below List Prices!"

Photo of the H200 post-hole digger mounted on a 3-point was not available, so this skid steer photo was used - but it is the same digger except for the attachment.

Specifications
Output Shaft	2" Hex
Digging Depth	48"
Hitch Mounts	Skid Steer Loaders, Front End Loader Bucket, Backhoes, Small Excavators
Auger Flighting Thickness	3/8"
Drive Motors	Systems Delivering 20-35 GPM at 3000 PSI Max; 3582 ft. lbs. Torque at 3000 PSI
Auger RPM	20 GPM 51 RPM; 35 GPM 90 RPM
Recommended Max. Diameter Auger	Rock 36"; Dirt 36"

Optional Equipment

Puff Auger, SDA Augers, RSA Augers, SRA Augers, RAD Augers

18", 24", and 36" Tree Augers

Skid Steer Loader, Front Loader Bucket, Backhoe, and Small Excavator Mount Kits

24" to 72" Variable Length Auger Extensions

Rhino HPHD Post-Hole Digger

$Call For Our "Below List Prices!"

(Shown with optional equipment)

For agricultural, commercial, or industrial applications, Rhino offers a Post Hole Digger that's right for you.
The heavy-duty HPHD features reversible CAT I-II hitch pins and a 3-1/2" diameter reinforced boom to handle heavy-duty applications on a wider range of tractors. All Rhino diggers have fully-shielded Cat 2 drivelines for safety.
The maximum operating PTO speed of all Rhino post hole diggers should not exceed 300 RPM.

Specifications
Hitch Pins	CAT I or II
Yoke Tubing	2-7/8"
Boom Tubing	3-1/2"
Auger Length	42"
540 RPM*	Std.
Cat 2 Driveline (Shielded)	Std.
2" Output Shaft (Shielded)	Std.
Gearbox Warranty	5 Years
Gearbox (Ratio/Weight)	3.18:1 (84 Lbs.)

Extra Equipment	Optional Equipment
7"or 14" Auger Extensions	Shear Bolt or Radial Pin Slip Clutch Driveline
Auger Adapter (to adapt Rhino Auger to a 2-9/16" output shaft)	6", 9", 12", 15", 18", or 24" Augers
Display Stand
CAT II Hitch Pins
Guide Handle

Rhino Hydraulic Drive Post-Hole Digger

$Call For Our "Below List Prices!"

(Shown with optional equipment)

Hydraulic Drive post hole diggers from Rhino are ideal for many agricultural applications and are backed by a Five-Year Limited Gearbox Warranty and a Two-Year Limited Hydraulic Motor Warranty.
Versatility is guaranteed with a choice of three-point, bolt-on loader bucket mount, or universal chain mounting kits for mounting to most CAT I-II 540 RPM tractors, front end loader buckets, or skid steer loaders. Because it is hydraulically driven, the dangers of a rotating driveline are eliminated. Rhino offers a choice of drive motors that fit a wide range of tractors and skid steer loaders. The low volume motor is designed for use with systems delivering 5-12 GPM at 1500-3000 PSI and delivers a maximum 700 ft. lbs. of torque at the spindle at 2500 PSI. Both motors are reversible, which can be a real time saver if the auger becomes stuck in the hole. Augers ranging in size from 6"-24" in diameter are available. Versatility, Safety, and Performance make hydraulically driven post hole diggers from Rhino an excellent choice for the farm or ranch.

Specifications
Input RPM (Max):	300 RPM
Output Shaft Diameter:	2"
Hitch Types:	CAT I-II Three-Point, Bolt-On Bucket Mount Kit, or Universal Chain Mount Kit
Low Volume Drive Motor:	For Systems Delivering 5-12 GPM at 1500 to 3000 PSI; 700 Ft. Lbs. Max. Torque at Spindle, at 2500 PSI
High Volume Drive Motor:	For Systems Delivering 10-25 GPM at 1500 to 3000 PSI; 1000 Ft. Lbs. Max. Torque at Spindle, at 2500 PSI
Digging Depth:	42"
Drive Protection:	Tractor's Hydraulic Relief Valve
Gearbox Ratio:	3.18:1
Gearbox Limited Warranty:	5 Years
Hydraulic-Drive Motor Limited Warranty:	2 Years

Extra Equipment	Optional Equipment
7"or 14" Auger Extensions	Low or High Volume Hydraulic-Drive Motor
Down Pressure Kit (Three-Point Only)	Three-Point, Bolt-On Bucket, or Universal Chain Mount Kit
Auger Adapter (To a 2-9/16" Outpur Shaft)	6", 9", 12", 15", 18", or 24" Auger
Display Stand
Guide Handle (Three-Point Only)

Rhino RPHD Post-Hole Digger

$Call For Our "Below List Prices!"

For agricultural, commercial, or industrial applications, Rhino offers a Post Hole Digger that's right for you.
The RPHD is equipped with CAT I hitch pins and a 2-7/8" diameter reinforced boom and yoke to handle general digging applications. The RPHD Post Hole Digger is available with an optional guide handle to help guide the auger from the tractor seat.
The maximum operating PTO speed of all Rhino post hole diggers should not exceed 300 RPM.

Specifications
Hitch Pins	CAT I
Yoke Tubing	2-7/8"
Boom Tubing	2-7/8"
Auger Length	42"
540 RPM	Std.
Cat 2 Driveline (Shielded)	Std.
2" Output Shaft (Shielded)	Std.
Gearbox Warranty	5 Years
Gearbox (Ratio/Weight)	3.18:1 (84 Lbs.)

Extra Equipment	Optional Equipment
7"or 14" Auger Extensions	Shear Bolt or Radial Pin Slip Clutch Driveline
Auger Adapter (to adapt Rhino Auger to a 2-9/16" output shaft)	6", 9", 12", 15", 18", or 24" Augers
Display Stand
Guide Handle

Rhino SPHD Post-Hole Digger

$Call For Our "Below List Prices!"

For agricultural, commercial, or industrial applications, Rhino offers a Post Hole Digger that's right for you.
The super heavy-duty SPHD is designed for commercial or industrial applications and features reversible CAT I-II hitch pins, a reinforced 3-1/2" diameter boom, and a massive 108 lb. gearbox. An optional down pressure kit is available for the SPHD to add an extra 500 lbs. of down pressure. The SPHD is available with either shear bolt or radial pin clutch driveline protection.
The maximum operating PTO speed of all Rhino post hole diggers should not exceed 300 RPM.

Specifications
Hitch Pins	CAT I or II
Yoke Tubing	2-7/8"
Boom Tubing	3-1/2"
Auger Length	42"
540 RPM*	Std.
Cat 2 Driveline (Shielded)	Std.
2" Output Shaft (Shielded)	Std.
Gearbox Warranty	5 Years
Gearbox (Ratio/Weight)	4.0:1 (108 Lbs.)

Extra Equipment	Optional Equipment
7"or 14" Auger Extensions	Shear Bolt or Radial Pin Slip Clutch Driveline
Down-Pressure Kit (SPHD)	6", 9", 12", 15", 18", or 24" Augers
Auger Adapter (to adapt Rhino Auger to a 2-9/16" output shaft)	CAT II Width Hitch
Display Stand
CAT II Hitch Pins

Iowa Farm Equipment
2491 122nd St.
Moscow, Iowa 52760
563-724-3500
sales@iowafarmequipment.com