Rhino Hydraulic Drive Post-Hole Digger
SPECIFICATIONS
- Minimum Hydraulic Flow Required is 10 GPM.
- Maximum Hydraulic Flow is 20 GPM.
- Minimum Operating Pressure Required is 1500 PSI.
- Maximum Operating Pressure is 3000 PSI.
- Outout Torque @ 2500 PSI is 1000 Ft. lbs.
- Output Shaft is 2" Round.
- Shaver Gearbox has 3.18:1 Ratio.
- Weight with a 9" Auger is 235lbs.
FEATURES & BENEFITS
H SERIES
- Mount Kits available for Skid Steer Loaders, Front End Loader buckets, backhoes, and Small Excavators.
- Industrial Grade Augers with 3/8” auger flighting are available in sizes from 6” to 36” diameter, depending on model.
- Augers available for conditions ranging from loose soil to solid rock or concrete.
- Flange mounted Output Shaft for faster Service or Repair.
- Drive motors compatible with flow rates from 10 to 35 GPM and pressures up to 3,500 PSI.
- Mount brackets include a Dual Swivel design to help keep the auger vertical during operation
N SERIES
- Mount Kits available for Skid Steer Loaders and Front End Loader Buckets.
- Industrial Grade Augers available in sizes from 2” to 36” diameter, depending on model Flange mounted Output Shaft for faster Service or Repair.
- Drive motors compatible with flow rates from 10 to 30 GPM and pressures up to 3,500 PSI.
- Mount brackets include a Dual Swivel design to help keep the auger vertical during operation.
- Augers are available for a wide range of soil, heavy clay, or loose rock conditions.