Iowa Farm Equipment -- Westendorf Stack Savers

Westendorf Stack Savers

$Call For Our "Below List Prices!"

When it comes to handling hay bales the patented Stack Saver is the perfect tool to get the job done fast and right. The Stack Saver l is a non-hydraulic bale lift with an automatic push-off for handling large round bales. It eliminates the problem of bales that stick, which in turn saves time and money. No added valves or hydraulics required. The automatic push-off is activated by your loader's bucket cylinders.

Patented design gives you a one-of-a kind tool that will speed up your hay operations.
No additional hydraulics required - it uses what you alreay have.
Sturdy, dependable reinforced frame.
Patented Snap-Attach™ system for tool-free quick installation and removal in just seconds.
Spear is made of heat treated forged steel with a full tapered length for easy penetration and release.
Strong stabilizer prods provide extra support and keep the bale from spinning.

PACKAGE OPTIONS & UPGRADES
Combination Coupler, Pin-Type Bracket

The Stack Saver I utilizes the bucket cylinders to push off the bale quickly and easily without the added cost of extra valves, cylinders or hoses.	The sturdy dependable frame (highlighted in red) of the Stack Saver I is designed to endure long-lasting heavy use.
Westendorf spears (highlighted in red) are made of heat treated forged steel with a full tapered length for easy penetration and release. The spear slides into the tapered bushing while the nut draws it in tight for maximum strength. Two stabilizer spears supply extra support for bale stability.	The Stack Saver I comes standard with the Snap-Attach™ adapters (highlighted in red). This allows you to connect to the Stack Saver I in seconds without the use of tools from the comfort of your tractor cab.

Westendorf SS-II-3 Stack Saver

$Call For Our "Below List Prices!"

When it comes to handling hay bales the patented Stack Saver is the perfect tool to get the job done. The Stack Saver ll is for handling large round or square bales. Does not require additional hydraulics, cylinder or 3rd line to utilize the Automatic Push-Off. It eliminates the problem of bales that stick, which in turn saves time and money.

Patented design gives you a one of a kind tool that will speed up your hay operations.
No additional hydraulics required - it uses what you alreay have.
Sturdy, dependable reinforced frame.
Patented Snap-Attach™ system for tool-free quick installation and removal in just seconds.
Three spears are made of heat treated forged steel with a full tapered length for easy penetration and release.

PACKAGE OPTIONS & UPGRADES
Combination Coupler and Pin-Type Bracket

The Stack Saver II utilizes the top edge of the frame to hold the bale stationary while the bucket cylinders pull the spears out of the bale quickly and easily. No added cost of extra valves, cylinders or hoses.	The Stack Saver II comes standard with the Snap-Attach™ couplers (highlighted in red). This allows you to connect to the Stack Saver in seconds without the use of tools from the comfort of your tractor cab.
The sturdy dependable frame (highlighted in red) of the Stack Saver II is designed endure long-lasting heavy use.	Westendorf spears (highlighted in red) are made of heat treated forged steel with a full tapered length for easy penetration and release. The spear slides into the tapered bushing while the nut draws it in tight for maximum strength. The Stack Saver II-3 uses one long spear with two smaller support spears to hold the bale in place.

Westendorf SS-II-3L Stack Saver

$Call For Our "Below List Prices!"

When it comes to handling hay bales the patented Stack Saver is the perfect tool to get the job done. The Stack Saver ll-3L is for handling large square and bales. It does not require additional hydraulics, added cylinders or 3rd line to utilize the Automatic Push-Off. It utilizes the bucket cylinders on your loader to push-off the bale while the frame holds the bale stationary. It eliminates the problem of having spears stick in the bale, even at two or three high.

Patented design gives you a one of a kind tool that will speed up your hay operations.
No additional hydraulics required - it uses what you alreay have.
Sturdy, dependable reinforced frame.
Patented Snap-Attach™ system for tool-free quick installation and removal in just seconds.
Three long spears are made of heat treated forged steel with a full tapered length for easy penetration and release.

PACKAGE OPTIONS & UPGRADES
Combination Coupler and Pin-Type Bracket

Westendorf spears (highlighted in red) are made of heat treated forged steel with a full tapered length for easy penetration and release. The spear slides into the tapered bushing while the nut draws it in tight for maximum strength. The Stack Saver II-3L uses three long spears to hold the bale in place.	The Stack Saver II utilizes the top frame to hold the bale stationary as bucket cylinders pull the spears out of the bale quickly and easily. No added cost of extra valves, cylinders or hoses.
The Stack Saver II comes standard with the Snap-Attach™ adapters (highlighted in red). This allows you to connect to the Stack Saver in seconds without the use of tools from the comfort of your tractor cab.	The sturdy dependable frame (highlighted in red) of the Stack Saver II is designed endure long-lasting heavy use.

Westendorf SS-II-4 Stack Saver

$Call For Our "Below List Prices!"

When it comes to handling hay bales the patented Stack Saver is the perfect tool to get the job done. The Stack Saver ll-4 is for handling large square and round bales. Does not require additional hydraulics, cylinder or 3rd line to utilize the Automatic Push-Off. Eliminates the problem of spears that stick, even at two or three high.

Patented design gives you a one of a kind tool that will speed up your hay operations.
No additional hydraulics required - it uses what you alreay have.
Sturdy, dependable reinforced frame.
Patented Snap-Attach™ system for tool-free quick attaching and removing in just seconds.
Three spears are made of heat treated forged steel with a full tapered length for easy penetration and release.

PACKAGE OPTIONS & UPGRADES
Combination Coupler and Pin-Type Bracket

The sturdy dependable frame (highlighted in red) of the Stack Saver II is designed endure long-lasting heavy use.	Westendorf spears (highlighted in red) are made of heat treated forged steel with a full tapered length for easy penetration and release. The spear slides into the tapered bushing while the nut draws it in tight for maximum strength. The Stack Saver II-4 uses four short spears to hold the bale in place.
The sturdy dependable frame (highlighted in red) of the Stack Saver II is designed endure long-lasting heavy use.	The Stack Saver II comes standard with the Snap-Attach™ couplers(highlighted in red). This allows you to connect to the Stack Saver in seconds without the use of tools from the comfort of your tractor cab.

Iowa Farm Equipment
2491 122nd St.
Moscow, Iowa 52760
563-724-3500
sales@iowafarmequipment.com