Iowa Farm Equipment Banner
| Home | Excavator Attachments | Grapples & Hydraulic Rotators | Skid Steer Attachments | Valby Grapples | Valby Stone & Waste Grapples | Contact Us |

Valby STG36 Stone Grapple

The Valby STG36 is a Grapple used for applications in which a tip-to-tip pinching function is needed, rather than a bypass function. The maximum opening of the STG36 is 36".

  • Hardox is a prime steel used in the manufacture of high quality log grapples.
  • All Valby grapples have a bronze bushing at every joint, and every joint has a grease fitting.
  • Large, powerful cylinder.
  • Double connection rods provide good balance and less stress.
  • Modern bypass grapple design.


The STG36 in a closed position, with the jaws together.


The mounting plate for the STG36. An R45 rotator can be used for in conjunction with this grapple.


Above two photos. The STG36 has grease fittings at each joint.


The jaw material is thick (meter reads 0.6 inches).

SPECIFICATIONS
Weight 148 lbs.
Maximum Opening 36"
Width of Wider Jaw 10-2/3"


Copyright © 2004 - 2012 by Iowa Farm Equipment