Iowa Farm Equipment logo
| Home | Arbor, Forestry & Logging Equipment | We ship nationwide affordably !

Valby GR50-HD Log Grapple

$Call For Our "Below List Prices!"

The Valby GR50-HD is suitable for use on smaller truck loaders. We recommend the R45 rotator with this grapple.

FEATURES:
  • Modern bypass grapple design.
  • Hardox is a prime steel used in the manufacture of high quality log grapples.
  • All Valby grapples have a bronze bushing at every joint, and every joint has a grease fitting.
  • Large, powerful cylinder.
  • Double connection rods provide good balance and less stress.
  • A belly plate protects the cylinder from underneath.
  • The Valby bypass grapples have excellent geometry. The form of the claws enables a smooth roll in of the stems. The grapples also close to a tight minimum opening.


The jaws open up to 50-3/4". The area inside the jaws when closed to where they meet is: 2.37 sq. ft.


The jaws are made out of Hardox, a prime steel for grapples. The jaws are almost 5/8" thick. The grease fittings are protected in exposed areas.


SPECIFICATIONS
Max. Gripping Width 50-3/4"
Min. Opening 3-1/2"
Max. Lifting Capacity 3,960 lbs.
Height Open 26-3/8"
Height Closed 20"
Width of Wider Claw 11-1/2"
Working Pressure 2,900 PSI
Jaw Material Hardox
Weight 231 lbs.
Recommended Rotator R45


Iowa Farm Equipment
2491 122nd St.
Moscow, Iowa 52760
563-724-3500
sales@iowafarmequipment.com

Copyright © 2004 - 2009 by Iowa Farm Equipment