Wallenstein Bush Pilot Tractor Logging / Skidding Winches

Wallenstein FX35 Skidding Winch Wallenstein FX66 Skidding Winch Wallenstein FX85 Skidding Winch Wallenstein FX110 Skidding Winch Wallenstein FX140 Skidding Winch
Model FX35 Model FX66 Model FX85 Model FX110 Model FX140

NAVIGATE THE FARTHEST REACHES OF YOUR FOREST
Managing the Full Potential of Your Forest is Easy with the Pulling Strength of the Bush Pilot Skidding Winch. You Can Now Reach the Trees You Need to Cut, Even on Steep Hills or Swampland Without the Need for Large Heavy Equipment. For Tractors 15 - 140 HP, the New Bush Pilot Builds on Wallenstein's Strong Reputation of Skidding Winches with Pulling Strength Up to 14,000-lbs & Reach Up to 165 feet.



Wallenstein FX35 Skidding Winch

Wallenstein FX35 Skidding Winch

FEATURES

  • 3,500 lb. Pulling Capacity.
  • 15 - 30 Recommended HP.
  • Category I 3-Point Mount.
  • 22 - 260 ft./min.
  • 80' of 5/16" Synthetic Rope.
  • 1 Choker Chain.
  • Weight: 245 lbs.
  • Dimensions: 27" x 40" x 48".
  • Two Speed Hydraulic Winch - Requires 2 - 12 GPM, Optimum 6 GPM.

Wallenstein FX35 Brush Pilot Skidding Winch

Wallenstein FX35 Winch Details
Hydraulic Powered Winch

Wallenstein FX35 Winch Details
Choker Chain

Wallenstein FX35 Brush Pilot Skidding Winch Wallenstein FX35 Brush Pilot Skidding Winch

MODEL FX35 LOGGING/SKIDDING WINCH SPECIFICATIONS
Pulling Capacity 3,500 lbs.
HP Recommendation 15 - 30 HP
Mounting (3 Point) Category I
Cable Speed 22 - 260 ft./min.
Cable Size 80' of 5/16"
Winch Type 2-Speed Hydraulic
Weight 245 lbs.
Dimensions 27" x 40" x 48"
Choker Chain 1 Included
Hydraulic Flow Requires 2 - 12 GPM, Optimum 6 GPM
Specifications & Designs Are Subject to Change Without Notice


Wallenstein FX66 Skidding Winch

Wallenstein FX66 Skidding Winch

FEATURES

  • 6,600 lb Pulling Capacity.
  • 30 - 60 Recommended HP.
  • Category 1 3PH Mount.
  • 540 RPM Max PTO Input Speed.
  • 96-238 ft./min. Cable Speed at 540 RPM.
  • 165’ of 3/8” Cable.
  • Mechanical, Dry Disk Clutch.
  • Weight: 450 lbs.
  • Dimensions: 19” x 40” x 71".
  • * Keynote sliders not included with FX66.

OPTIONS

Wallenstein FX66 Brush Pilot Skidding Winch
Synthetic Rope & Choker

Wallenstein FX66 Skidding Winch
Self Releasing Snatchbox Pulley

Wallenstein Winch Colors

Wallenstein FX66 Skidding Winch
Keyhole Slots

Wallenstein FX66 Skidding Winch
Winch Cable End

Wallenstein FX66 Skidding Winch
Removable Clutch Assembly

Wallenstein FX66 Skidding Winch
Raised PTO Connection

Wallenstein FX66 Brush Pilot Skidding Winch Wallenstein FX66 Brush Pilot Skidding Winch

MODEL FX66 LOGGING/SKIDDING WINCH SPECIFICATIONS
Pulling Capacity 6,600 lbs.
HP Recommendation 30 - 60 HP
Mounting (3 Point) Category I
Max. PTO Input Speed 540 RPM
Cable Speed @ 540 RPM 96 - 238 ft./min.
Cable Size 165' of 3/8"
Clutch Type Mechanical, Dry Disk
Weight 450 lbs.
Dimensions 19" x 40" x 71"
Specifications & Designs Are Subject to Change Without Notice


Wallenstein FX85 Skidding Winch

Wallenstein FX85 Brush Pilot Skidding Winch

FEATURES

  • 8,500 lb Pulling Capacity.
  • 30 - 60 Recommended HP.
  • Category 1 3PH Mount.
  • 540 RPM Max PTO Input Speed.
  • 96-238 ft./min. Cable Speed at 540 RPM.
  • 165’ of 3/8” Cable.
  • 2 Choker Chains.
  • Mechanical, Dry Disk Clutch.
  • Weight: 470 lbs.
  • Dimensions: 27” x 40” x 76”.
  • Optional Bolt-On Remote Control Kit.
  • FX85R Includes Factory Installed Remote Control Kit **.

OPTIONS

Wallenstein FX66 Brush Pilot Skidding Winch
Synthetic Rope & Choker

Wallenstein FX66 Skidding Winch
Self Releasing Snatchbox Pulley

Wallenstein FX85 Winch Options
Remote Control

Wallenstein Winch Colors

Wallenstein FX85 Brush Pilot Skidding Winch

Wallenstein FX85 Skidding Winch
Keyhole Slots

Wallenstein FX85 Skidding Winch
Winch Cable End

Wallenstein FX85 Skidding Winch
Keyhole Sliders

Wallenstein FX85 Skidding Winch
Snatchblock Pulley System

Wallenstein FX85 Skidding Winch
Removable Clutch Assembly

Wallenstein FX85 Skidding Winch
Trailer Hitch

Wallenstein FX85 Skidding Winch
Raised PTO Connection


MODEL FX85 LOGGING/SKIDDING WINCH SPECIFICATIONS
Pulling Capacity 8,500 lbs.
HP Recommendation 30 - 60 HP
Mounting (3 Point) Category I
Max. PTO Input Speed 540 RPM
Cable Speed @ 540 RPM 96 - 238 ft./min.
Cable Size 165' of 3/8"
Clutch Type Mechanical, Dry Disk
Weight 470 lbs.
Dimensions 27" x 40" x 76"
Choker Chains 2 Included
FX85R SPECIFICATIONS, AS ABOVE PLUS:
Factory Installed Remote Control Kit*** Included
***F200 Remote Kit Requires 12 Volts from the Tractor, 1-2 GPM Hydraulic Flow from Tractor. The Winch is Pre-Set at 700 PSI.
Specifications & Designs Are Subject to Change Without Notice


Wallenstein FX110 Skidding Winch

Wallenstein FX110 Skidding Winch

FEATURES

  • Keyhole Slots.
  • Winch Cable End.
  • Keyhole Sliders.
  • Snatchblock Pulley System.
  • Removable Clutch Assembly.
  • Trailer Hitch.
  • Middle Box Connection.
  • Raised PTO Connection.

OPTIONS

  • Synthetic Rope & Choker.
  • Self Releasing Snatchbox Pulley.
  • Remote Control.

Wallenstein FX66 Brush Pilot Skidding Winch
Synthetic Rope & Choker

Wallenstein FX66 Skidding Winch
Self Releasing Snatchbox Pulley

Wallenstein FX85 Winch Options
Remote Control

Wallenstein Winch Colors

Wallenstein FX110 Skidding Winch
FX110 Shown in Green Color

Wallenstein FX110 Skidding Winch
FX110 Shown in Green Color

Wallenstein FX110 Skidding Winch
FX110 Shown in Green Color

Wallenstein FX85 Skidding Winch
Keyhole Slots

Wallenstein FX85 Skidding Winch
Winch Cable End

Wallenstein FX85 Skidding Winch
Keyhole Sliders

Wallenstein FX85 Skidding Winch
Snatchblock Pulley System

Wallenstein FX85 Skidding Winch
Removable Clutch Assembly

Wallenstein FX85 Skidding Winch
Trailer Hitch

Wallenstein FX85 Skidding Winch
Raised PTO Connection

Wallenstein FX110 Skidding Winch
FX110 Shown in Orange Color

Wallenstein FX110 Skidding Winch
FX110 Shown in Orange Color


MODEL FX110 LOGGING/SKIDDING WINCH SPECIFICATIONS
Pulling Capacity 11,000 lbs.
HP Recommendation 45 - 100 HP
Mounting (3 Point) Category I & II
Max. PTO Input Speed 540 RPM
Cable Speed @ 540 RPM 96 - 253 ft./min.
Cable Size 165' of 7/16"
Clutch Type Mechanical, Dry Disk
Weight 796 lbs.
Dimensions 28" x 50.5" x 79"
Choker Chains 2 Included
FX110R SPECIFICATIONS, AS ABOVE PLUS:
Factory Installed Remote Control Kit*** Included
***F200 Remote Kit Requires 12 Volts from the Tractor, 1-2 GPM Hydraulic Flow from Tractor. The Winch is Pre-Set at 700 PSI.
Specifications & Designs Are Subject to Change Without Notice


Wallenstein FX140 Skidding Winch

Wallenstein FX140 Skidding Winch

FEATURES

  • Keyhole Slots.
  • Winch Cable End.
  • Keyhole Sliders.
  • Snatchblock Pulley System.
  • Removable Clutch Assembly.
  • Trailer Hitch.
  • Middle Box Connection.
  • Raised PTO Connection.

OPTIONS

  • Synthetic Rope & Choker.
  • Self Releasing Snatchbox Pulley.
  • Remote Control.

Wallenstein FX66 Brush Pilot Skidding Winch
Synthetic Rope & Choker

Wallenstein FX66 Skidding Winch
Self Releasing Snatchbox Pulley

Wallenstein FX85 Winch Options
Remote Control

Wallenstein Winch Colors

Wallenstein FX110 Skidding Winch
FX110 Shown in Green Color

Wallenstein FX110 Skidding Winch
FX110 Shown in Green Color

Wallenstein FX110 Skidding Winch
FX110 Shown in Green Color

Wallenstein FX85 Skidding Winch
Keyhole Slots

Wallenstein FX85 Skidding Winch
Winch Cable End

Wallenstein FX85 Skidding Winch
Keyhole Sliders

Wallenstein FX85 Skidding Winch
Snatchblock Pulley System

Wallenstein FX85 Skidding Winch
Removable Clutch Assembly

Wallenstein FX85 Skidding Winch
Trailer Hitch

Wallenstein FX85 Skidding Winch
Raised PTO Connection

Wallenstein FX110 Skidding Winch
FX110 Shown in Orange Color

Wallenstein FX110 Skidding Winch
FX110 Shown in Orange Color


MODEL FX140 LOGGING/SKIDDING WINCH SPECIFICATIONS
Pulling Capacity 14,000 lbs.
HP Recommendation 60 - 140 HP
Mounting (3 Point) Category I & II
Max. PTO Input Speed 540 RPM
Cable Speed @ 540 RPM 98 - 246 ft./min.
Cable Size 165' of 1/2"
Clutch Type Mechanical, Dry Disk
Weight 898 lbs.
Dimensions 28" x 58.5" x 80"
Choker Chains 2 Included
FX140R SPECIFICATIONS, AS ABOVE PLUS:
Factory Installed Remote Control Kit*** Included
***F200 Remote Kit Requires 12 Volts from the Tractor, 1-2 GPM Hydraulic Flow from Tractor. The Winch is Pre-Set at 700 PSI.
Specifications & Designs Are Subject to Change Without Notice