Iowa Farm Equipment Banner
| Home | Post Drivers & Post-Hole Diggers | Contact Us | We ship nationwide affordably !

Worksaver Post Drivers


Worksaver Manual Post Driver
Manual Positioning
Driver

Worksaver Hydraulic Post Driver
Hydraulic Center
Mount Driver

Worksaver 3-Way Positioning Offset Post Driver
3-Way Positioning
Offset Driver


Worksaver Skid Steer Mounted Post Driver
Skid Steer Mounted


Worksaver Self Contained Post Driver
Self Contained

Worksaver Post Driver Options
Post Driver Options



HYDRAULIC POST DRIVERS
-For Wood and Steel Posts-

Don't wait any longer for post to set before you string your fence. HYDRAULIC POST DRIVERS produce a driving action which helps eliminate air pockets in the soil. This provides an immediate air tight post set, allowing the operator to install fence. These rugged drivers are dependable for everyday, heavy duty use. Built for a one-man operation, these post drivers are strong enough to drive railroad ties quickly and easily.

Worksaver offers three post driver sizes, Models "HPD-16" , "HPD-20" and our heavy duty model "HPD-24". Driver's are available with different positioning style arrangements.

Worksaver drivers are operated hydraulically with a single spool valve for open and closed center hydraulic systems. This allows tractor operators with either hydraulic system the ability to quickly change a plug to match the operator's tractor system.

The sturdy driving ram force is increased by the large heavy duty springs making it a powerful driving force, with a cycle rate maximum of 40 strokes per minute.

The PATENTED slide blocks guide the driving ram in the carriage, providing maximum surface contact for better performance and longer carriage life. A target bubble level indicator, mounted on the driver valve plate, allows the operator to adjust the driver easily, without guess work, to ensure that the post will be straight. Quality and confidence are built into each driver and underwritten with a two year limited warranty on each Worksaver driver.

Please Read Carefully and Follow All Safety Instructions, Use Post Holder, and Always Wear Safety Glasses.


Manual Positioning Driver

If you have a small amount of fence to build or replace, then the models HPD-16 and HPD-20 are the ones for you. If you have a large amount of fence to build, then these drivers are ideal for terrain requiring little alignment adjustment. The heavy duty adjusting base is built to withstand shock loads drivers produce during operation. Both drivers use two manual adjustable, deep-threaded, plated cranks. One crank adjusts the fore and aft positions. Another crank adjusts the side to side positions. Grease zerks are located on all pivoting members.

OPTIONAL STABILIZER LEGS

  • Eliminates Tractor Tire Bounce
  • Reduces Driver Movement
  • Adjustable for Different Working Heights
  • Driver is Self-Standing
  • Allows Inside Storage

SPECIFICATIONS
MODELS HPD-16 HPD-20
Maximum Post Size: 7 in. x 9 ft. 8.75 in. x 10 ft.
Impact at Full Stroke: 32,000 lbs. 80,000 lbs.
Impact at Half Stroke: 16,000 lbs. 40,000 lbs.
Minimum Tractor Size: 22 PTO HP 35 PTO HP
Rear Hitch Type: Cat. I & II
Drive Cylinder Size: 2 in. x 56 in. 2 in. x 68 in.
Operating Range: 50 in. to 116 in. 50 in. to 128 in.
Tilt Adjustment (Front/Back): 10o from Vertical
Tilt Adjustment (Side/Side): 17o from Vertical
Shipping Weight 643 lbs. 843 lbs.

Please Read Carefully and Follow All Safety Instructions, Use Post Holder, and Always Wear Safety Glasses.


Hydraulic Center Mount

This heavy duty driver is ideal for rolling terrain where vertical alignment needs adjustment for almost each post. The models HPD-16 SHC , HPD-20 SHC and HPD-24 SHC heavy duty design allows the operator to quickly align post and reduce tractor shock. The positioning pivots are built to withstand shock loads drivers produce during operation.

Fast and easy alignment is accomplished by two large 3" x 6" hydraulic cylinders. A separate two spool valve is easily accessible to the operator. One valve operates the fore and aft positions and the other operates the side to side positions. This valve operates on either open-center or closed-center hydraulic systems to match the operators tractor system, too. The "SHC" driver has stabilizer legs as standard equipment. The stabilizer legs are made of 2.5" x 2.5" tubular steel. They have independent height adjustment to allow for differences in terrain. The legs help to dampen the tractor tire bounce and reduce the hitch lift arm movement.


SPECIFICATIONS
Models HPD-16 SHC HPD-20 SHC HPD-24 SHC
Maximum Post Size 7"x9' 8.75"x10' 11"x10'
Impact at Full Stroke 32,000 lbs. 80,000 lbs. 110,000 lbs.
Impact at Half Stroke 16,000 lbs. 40,000 lbs. 55,000 lbs.
Minimum Tractor Size 22 PTO HP 35 PTO HP 50 PTO HP
Rear Hitch Type Cat. I & II Cat. II
Number of Cylinders / Size Two / 3"x6" Two / 3"x6" Two / 3"x6"
Operating Range 50" to 116" 50" to 128" N / A
Minimum Hydraulic Requirements 3 - 4 GPM 6 - 8 GPM 12 GPM
Valve 2 Spool 2 Spool 2 Spool
Shipping Weight 853 lbs. 1,010 lbs. 1,116 lbs.
Tilt Adjustment (Front/Back) 17o from vertical
Tilt Adjustment (Side/Side) 20o from vertical

Please Read Carefully and Follow All Safety Instructions, Use Post Holder, and Always Wear Safety Glasses.


3-Way Positioning Offset
with Swivel Driving Head


This heavy duty driver is ideal for driving posts in corners and along ditch banks or existing fence lines. The models HPD-16 SWO , HPD-20 SWO and HPD-24 SWO heavy duty design allows the operator to quickly align posts and reduce tractor shock. The positioning pivots are built to withstand shock loads drivers produce during operation.

The "SWO" driver has a stabilizer box as standard equipment. The top opening allows the box to be filled with up to 500 lb. of heavy material to dampen the tractor tire bounce and reduce the hitch lift arm movement. There are two wagon hitch locations to pull wagon loads of fence post and materials to the job eliminating the need for additional operations.

Quick and easy alignment is accomplished by two large 3" x 6" and one 24" hydraulic cylinders. A separate three spool valve is easily accessible to the operator. Two valves operate the fore and aft or the side to side positions. Another valve operates the offset cylinder to extend the driver 24 " to the tractor's left side. This three spool valve operates on either open-center or closed-center hydraulic systems to match the operator's tractor system. The swivel mount offers three positions to angle the driving head for maximum operation efficiency. A locking bolt secures the driver position in place for work or travel.


Swivel Mount & HD Cylinders

(Note: Worksaver recommends that the driver be placed in the transport position during travel and storage.)


SPECIFICATIONS
Models HPD-16 SWO HPD-20 SWO HPD-24 SWO
Maximum Post Size 7 in. x 9 ft. 8.75 in. x 10 ft. 11 in. x 10 ft.
Impact at Full Stroke 32,000 lbs. 80,000 lbs. 110,000 lbs.
Impact at Half Stroke 16,000 lbs. 40,000 lbs. N / A
Minimum Tractor Size 40 PTO HP 60 PTO HP 45 PTO HP
Rear Hitch Type Cat. II
Drive Cylinder Size 2 in. x 56 in. 2 in. x 68 in. 2-3 in. x 6 in. / 1-2 in. x 24 in.
Operating Range 50 in. to 116 in. 50 in. to 128 in. N / A
Tilt Adjustment (Front/Back) 17ofrom vertical
Tilt Adjustment (Side/Side) 20ofrom vertical
Swivel Adjustment 45o - 90o - Rear Facing
Weight 1,276 lbs. 1,433 lbs. 1,669 lbs.

Please Read Carefully and Follow All Safety Instructions, Use Post Holder, and Always Wear Safety Glasses.


Skid Steer Mounted

SKID STEERS ( Skidsteers ) are more versatile today due to the abundance of implements on the market to perform different functions. The Worksaver post driver models add to your versatility.

The models HPD-16MSS and the HPD-20MSS skid steer units have manual adjustment for tilt fore/aft and side/side.

The models HPD-16HSS, HPD-20HSS, and HPD-24HSS have hydraulic adjustment using a separate valve to operate the fore/aft and side/side tilt.

The photos below illustrate the different skid steer models we currently work with to produce a well operating fence building system.

Please Read Carefully and Follow All Safety Instructions, Use Post Holder, and Always Wear Safety Glasses.



MODEL ITEM NO. DESCRIPTION WEIGHT
HPD-16 MSS 814628 Skid Steer Mount (Manual Adjustment) Driver 536 lbs.
HPD-16 HSS 814630 Skid Steer Mount (Hydraulic Adjustment) Driver 857 lbs.
HPD-20 MSS 814633 Skid Steer Mount (Manual Adjustment) Driver 693 lbs.
HPD-20 HSS 814635 Skid Steer Mount (Hydraulic Adjustment) Driver 1,014 lbs.
HPD-24 HSS 814982 Skid Steer Mount (Hydraulic Adjustment) Driver 1,250 lbs.


Self Contained
Model's - HPD-16 HSS/P
HPD-20 HSS/P and HPD-24 HSS/P

GREATER VERSATILITY

RUGGED CONSTRUCTION

EFFECTIVE and FAST OPERATION

IDEAL FOR ALL SKID STEERS

Features
  • Designed for rugged, heavy-duty use.
  • Features its' own hydraulic pump, motor and reservoir.
  • Post Driver hydraulic system is independent of Skid Steer system, eliminating risk of oil contamination.
  • No special return line or fittings required for quick convenient installation.
  • Incorporates spin on filter to protect its' hydraulic system.
  • Mounts to any Skid Steer with "universal" attaching system.
  • Patented slide blocks, made of ultra high molecular weight polyethylene, offers more contact surface for improved performance.
  • Standard level indicator for quick accurate driver alignment.
  • Spring dampers reduce "whipping action", helping to extend spring life.
  • Chrome-plated high tensile steel hydraulic cylinder rod for long life.
SPECIFICATIONS
  HPD-16 HSS/P HPD-20 HSS/P HPD-24 HSS/P
Max. Post Size 7" x 9' 8.75" x 10' 11" x 10'
Impact At Full Stroke 32,000 lbs. 80,000 lbs. 110,000 lbs.
Impact At Half Stroke 16,000 lbs. 40,000 lbs. 55,000 lbs.
Tilt Adjustment
Front/Back
17oeach way from vertical
Tilt Adjustment
Side/Side
20oeach way from vertical
No. of Cylinder/Size Two 3" x 6"
Minimum Hydraulic Reg. 10 GPM
Reservoir Capacity 5 gal.
Pump Type Gear
Pressure Relief Setting 1500 PSI
Filter Type
(suction)
Spin-on
Hoses (less Couplers) Standard
Mounting "Universal" Skid Steer Quick-Attach Mount
Storage/Transport
Locking Straps
Standard all Models
Shipping Weight 1,058 lbs. 1,215 lbs. 1,451 lbs.


OPTIONS
MODEL ITEM NO. DESCRIPTION WEIGHT
Manual Mount (Rear 3 Pt.) 814580 Manual Adjustment Base & 3 Pt. Mount w/Legs Only 168 lbs.
Manual Mount (Rear 3 Pt.) 814865 3Pt. Mount with Adjustable Legs 118 lbs.
Manual Mount (Rear 3 Pt.) 814810 Adjustable Legs for 3Pt. mount designed for legs (Fits 3-Pt manual mount 1977-2000 units only) 56 lbs.
Front Loader Mount 814845 Hydraulic Front Loader Mount only (NOT for model)(Optional Loader Brackets are available - see page 6) 675 lbs.
Skid Steer Mount 814637 *Manual Adjustment Skid Steer mount only (NOT for model 24 drivers) 193 lbs.
Skid Steer Mount 814610 Skid Steer "universal" Hydraulic Mount Only 514 lbs.
Skid Steer 815000 Optional Hydraulic Power Package for Hydraulic Adjustment Skid Steer mounts. Contains - Hydraulic Motor w/self-contained Hydraulic System 201 lbs.
Hydraulic Mount (Rear 3 Pt.) 814680 Hydraulic Center Mount Only (SHC)(Inc. Hyd. Pkg.) 380 lbs.
Hydraulic Mount (Rear 3 Pt.) 814805 Offset Pivot Mount Only (SWO)(to pivot Ram 90 Degrees)(Includes Hydraulic Package) 933 lbs.
  814490 Adaptor for Steel T-posts 11 lbs.
Bobcat 814905 Return line with fittings, hose, and hardware (not for models 773 or 873G) 5 lbs.
Case, Thomas, Daewoo 814915 Return Fitting 6 lbs.
Deere-Prior 1/99 814910 Return line with fittings, hose, and hardware 6 lbs.
Gehl 814895 Return fitting 7 lbs.
Mustang 814940 Return fitting 6 lbs.
New Holland 814910 Return line with fittings, hose, and hardware 6 lbs.
Deere-200 Series 814920 Return line with fittings, hose, and hardware 6 lbs.
Bobcat 814908 Return line with fittings, hose, and hardware for Bobcat Models S-175 6 lbs.


Copyright © 2004 - 2012 by Iowa Farm Equipment