Iowa Farm Equipment -- Worksaver Skid Steer Hay Handling Equipment

We ship nationwide affordably !

Worksaver Skid Steer Hay Handling Equipment

Designed for Use on Skid Steer Loaders. These Attachments are Manufactured to Interface with the "Universal" Skid Steer Quick Attach Mounting System. They may Also be Used on Tractor Front End Loaders that use the "Universal" Skid Steer Quick Attach Mounting System for Their Attachments.

SSB-220 BALE SPEAR
	Skid Steer Single Bale Spear. Rated at 2,200 lbs. Designed to Interface with "Universal" Skid Steer Quick Attach System. Bolt-in Tapered Spear has a Useable Length of 42".
SSB-3000 BALE SPEAR
	Skid Steer Double Bale Spear. Rated at 3,000 lbs. Designed to Interface with "Universal" Skid Steer Quick Attach System. Bolt-In Tapered Spears have a Useable Length of 42".
SSRB-330 BALE SPEAR
	Skid Steer Triple Bale Spear. Rated at 3,000 lbs. for Handling Single or Double (with Optional Uprights 830693) Mid-size Square Bales. Bolt In Tapered Spear has a Useable Length of 42", Spaced 26-1/2" Apart. Interfaces with "Universal" Skid Steer Quick Attach System. Optional Bolt On Uprights for SSRB Allows Handling Two 4' x 4' x 8' Bales at Once.
SSRB-340 BALE SPEAR
	Same as SSRB-330 Except With 44" Spears. Skid Steer Triple Bale Spear. Rated at 4,000 lbs. for Handling Single or Double (with Optional Uprights 830693) Large-size Square Bales. Bolt In Tapered Spear has a Useable Length of 42", Spaced 26-1/2" Apart. Interfaces with "Universal" Skid Steer Quick Attach System. Optional Bolt On Uprights for SSRB Allows Handling Two 4' x 4' x 8' Bales at Once.
OPTIONAL UPRIGHT KIT
Optional Bolt On Uprights for SSRB-330/340, Allows Handling Two 4' x 4' x 8' Bales at Once.
SSBH-2072 BALE HAND
	Skid Steer "Bale Hand" Designed to Handle 4 to 6 ft. Wrapped or Dry Bales Up To 2,200 lbs. Both Arms Open to Clamp the Bale. Hydraulic Cylinder is Included.

BALE SPIN-OFF FEEDERS

Designed as an efficient hay management tool for moving and feeding round bales. The Spin Off hydraulically rotates the bale, unwinding the hay in to a windrow.

Eliminate wasted hay; only unroll what cattle will clean up in one hour.
Almost no manure buildup; by feeding in a different location each day.
Easy operation from the cab of the tractor or Skid Steer.
Models for 3-pt, Front Loaders & Skid Steers.

Hydraulically driven for better operator control.
Rotates in both directions for easy feeding.
Cushion valve in the motor provides protection for hydraulic components.
Forged tapered spear for easier spear penetration.

BALE SPIN-OFF FEEDER SPECIFICATIONS
MODEL	FSO-906	FLSO-907	SSSO-908
Item No.	831000	831020	831030
Frame Size	4" x 4" Sq. Tubing	3" & 4" Sq. Tubing	3" & 4" Sq. Tubing
Spear	Tapered Forged
DRIVE
Attaching Method	3-Point Cat. II / III**	Front Loader Pin-On*	Skid Steer "Universal"
Chain Type	#50 Roller Chain
Sprocket Ratio	3.75:1
HYDRAULICS
GPM-Requirements	8 - 10 GPM
PSI Requirements	Min. 1500 PSI
Hoses	Supplied (2) Less Ends	Less Hoses	Supplied (2) Less Ends
CUSHION VALVE
Factory Setting - Relief	1750 PSI
DIMENSIONS
Height	26-3/4"	23-1/4"	23-1/4"
Width	44-3/4"	60-1/2"	45-1/4"
Length with Spear	64-3/4"	64-3/4"	64-3/4"
Weight	250 lbs.	370 lbs.	325 lbs.
Optional interfacing brackets for most loader quick attach systems are available. * Optional pin & bushing kit available to allow use on Cat. I 3-pt hitch.