Worksaver Post-Hole Diggers

Building a new fence or replacing an existing one? Setting post for a structure, vineyards, or above ground crops? Landscaping or planting windbreaks? With Worksaver fence building products you'll get maximum results without a lot of work.
Worksaver is the leading manufacturer of post hole diggers in the United States, offering a wide selection to meet most of your needs. Our powerful post hole diggers and augers make digging smooth, deep holes fast and easy. Our diggers are built tough and built to last.
The Worksaver PTO-drive post hole digger product line includes the model 300 phd for utility size tractors, the model 500 phd for standard duty work, the model 720 phd for heavy duty work, and the models 925 phd for industrial duty work.
Every Worksaver post hole digger yoke and boom is constructed of heavy duty tubular steel. The gearbox shipped with our diggers is designed for long life, with a limited five year warranty.
Retrofit SAFETY GUARDING is available for older 3-point post hole diggers. Worksaver, Inc. encourages you to install SAFETY GUARDING on all older 3-point hitch models.
  Please Read and Follow All Product Safety Instructions!

Worksaver Compact / Utility Tractor
Post-Hole Digger

$Call For Our "Below List Prices!"

The model 300 post hole digger is designed to fit most 14 - 24 horsepower small tractors equipped with a category 0 three-point hitch and a 540 rpm PTO. (This model will fit the 16 hp Kubota model B7100 tractor). The model 300 post hole digger handles 6", 9", and 12" diameter standard duty 30" length augers. The three position boom allows the unit to fit a variety of tractor models. A lever is provided for the operator to adjust the auger starting angle.

The gearbox has a 3:1 gear ratio and is protected by the shear-pin PTO drive. The gearbox features tapered roller bearings and spring loaded seals. The gearbox has a 5 year limited warranty. The model 300 digger is built for years of trouble-free work with a minimum amount of maintenance.

NOTE:Most tractors of this size have lift arms made of 7/8 inch diameter (Cat. 1) pins, but with the 20 inch Cat. 0 spacing. Tractors with very short lift arms made for 5/8 inch diameter pins may not be suitable for digging post holes. (Special 5/8 inch diameter pins are available for those tractors that can handle the post hole digger.

Worksaver Standard Duty
Post-Hole Digger

$Call For Our "Below List Prices!"

The model 500 post hole digger handles 6", 9", or 12" standard or heavy duty augers with 2" inside diameter opening (see below). The three position boom allows the operator to maximize the auger digging depth. The model 500 mounts on tractors with category 1 or 2 rear three-point hitches. A lever is provided for the operator to adjust the digging angle from the driver seat. The gearbox is protected by the shear-pin PTO drive. The gearbox has a limited 5 year warranty and features tapered roller bearings and spring loaded seals.

The gearbox has a 3:1 gear ratio and is protected by the shear-pin PTO drive. The gearbox features tapered roller bearings and spring loaded seals. The gearbox has a 5 year limited warranty. The model 300 digger is built for years of trouble-free work with a minimum amount of maintenance.

NOTE:Most tractors of this size have lift arms made of 7/8 inch diameter (Cat. 1) pins, but with the 20 inch Cat. 0 spacing. Tractors with very short lift arms made for 5/8 inch diameter pins may not be suitable for digging post holes. (Special 5/8 inch diameter pins are available for those tractors that can handle the post hole digger.

The optional model DFK-50 Down Force Kit is designed for the model 500 post hole digger. The DFK-50 provides additional down pressure to dig through hard soil surfaces. The DFK-50 kit inludes the hydraulic cylinder & hoses.

NOTE:  Please keep a distance of 20 feet from moving parts

Worksaver Heavy Duty Post-Hole Digger

$Call For Our "Below List Prices!"

The model 720 Heavy Duty post hole digger easily handles augers from 6" to 24" with 2" inside diameter opening (see below). A three position boom adjustment allows for maximum auger use. Constructed of heavy duty steel materials, the model 720 is designed for years of work.

The model DFK-70 Down Force Kit is designed for the model 720 post hole digger. The DFK-70 provides down force pressure to dig through hard soil surfaces. The DFK-70 kit includes the hydraulic cylinder & hoses.

NOTE:  Please keep a distance of 20 feet from moving parts

Worksaver Industrial Duty
Post-Hole Digger

$Call For Our "Below List Prices!"

The model 925 Industrial Duty post hole digger has the power and strength to dig holes the depth and diameter you want. The model 925 handles up to a 30" auger. This economical post hole digger has shear-pin PTO protection for the gearbox if the auger encounters an immovable object. The industrial duty gearbox has a 4:1 gear ratio providing high torque for those tough digging jobs, especially using larger diameter augers.

The model DFK-90 Down Force Kit is designed for the model 925. The DFK-90 provides down force pressure to dig through hard soil surfaces. The DFK-90 kit includes the hydraulic cylinder & hoses.

Worksaver Hydraulic Post-Hole Digger

$Call For Our "Below List Prices!"

Worksaver offers seven hydraulic post hole diggers to meet most needs.

There are many benefits that hydraulic operated post hole digger provides over the PTO operated units. Three of the biggest benefits are:

1. The ability to reverse the auger should it become entangled in roots or rocks,
2. No longer replace shear-bolts or repair slip clutches.
3. No PTO lifting restrictions with the tractor, loader, or backhoe boom.

The models 614H and 624H three-point post hole diggers are designed for the operator without a front loader but likes the benefits that hydraulic operation. Both the 614H and 624H mount to tractors with cat. I/II hitches.

The 714H and 724H will attach to backhoe booms or excavators to allow an operator to reach hard to get to places. These units also attach to either side of a loader bucket with 4 - 1/2" bolts for an unobstructed view of the digging operation.

The 814H and 824H models clamp on to the bucket for easy on and off. Each unit slips on to the cutting edge of the bucket and has two turnbuckles and chains to secure it to the bucket.

Adjustable for the left or right side of the bucket, allows the operator to have a better view of the digging operation.

The 924H model mounts directly to skid steers with a universal quick attach for increased versatility.

Iowa Farm Equipment
2491 122nd St.
Moscow, Iowa 52760
563-724-3500
sales@iowafarmequipment.com

Copyright © 2004 - 2008 by Iowa Farm Equipment