H & S 1000 Series Bi-Fold Wheel Hay Rakes

H & S 1000 Series Bi-Fold Hay Wheel Rakes

The H & S 1460 & 1660 High Capacity Bi-Fold Rakes Feature a Hydraulically Set Raking Width of Up to 28' (Model 1460) or 32' (1660).

FEATURES

H & S 1000 Series Bi-Fold Hay Wheel Rakes

BUILT WITH QUALITY! STRONG & DEPENDABLE
H & S 1460 Hi-Capacity Bi-Fold Rake has the Raking Wheels Positioned Ahead of the Rake Arms, Main Frame Beams & Transport Wheel. Coupled with a High & Wide End of Frame, There are No Hangup Points or Restrictions When Raking the Heaviest of Hay Crops.

H & S 1000 Series Bi-Fold Hay Wheel Rakes

WRAP-A-ROUND GAUGE WHEELS
The Standard Wrap-a-Round Gauge Wheels Give Added Support to the Rake Beams. Storage for Transport Locks.

H & S 1000 Series Bi-Fold Hay Wheel Rakes

EASILY ADJUST GROUND PRESSURE
The Adjustment for the Ground Pressure on the Rake Wheels Allows the Operator to Fine Tune the Wheel Rake to Fit Varying Conditions.

H & S 1000 Series Bi-Fold Hay Wheel Rakes

ADJUSTABLE BRAKE BAND
A Brake Band on the Front Gauge Wheels can be Easily Adjusted to Field Conditions. Storage for Transport Locks.

H & S 1000 Series Bi-Fold Hay Wheel Rakes

INDEPENDET ARTICULATED RAKE BEAMS
Independent Articulated Rake Beams Have the Flexibility to Flex 3' Up or 3' Down. Large 60" Diameter Rake Wheels Turn Slower for Less Wear & Deliver More Capacity.

H & S 1000 Series Bi-Fold Hay Wheel Rakes

INDEPENDENT RAKE WHEEL SUSPENSION
Independent Rake Wheel Suspension Allows the Rake Wheels to Follow the Contour of the Ground & Low Maintenance "Bee Hive" Style Springs Support the Large 60" Rake Wheels. A Large Diameter Rake Wheel Hub is Used for Added Strength to the Rake Wheel Dish. The Rake Arms Feature 2 Ball Bearings on Each End of the Arm for Long Life, Smooth Operation & Less Wear Than Raked with Bushings.

H & S 1000 Series Bi-Fold Hay Wheel Rake

SET PREDETERMINED RAKING WIDTHS
Setting the Spring Loaded Stop Allows You to Set Pre-Determined Raking Widths Up to 28' on the 1460 & Up to 32' on the 1660. Raking Widths Can be Hydraulically Adjusted in Any Position Up to the Pre-Determined Raking Width.

H & S 1000 Series Bi-Fold Hay Wheel Rake

EASILY ADJUST WINDROW WIDTH FROM 38'' TO 58''
The Windrow Width Adjustment is Done with a Hand Crank & Adjusts Windrows from 38" to 58" in Width. Limited Oscillating Offset Tandem Transport Wheels Assure a Smooth, Level Ride, Even Over Irrigation Tracks.

H & S 1000 Series Bi-Fold Hay Wheel Rake

RAKE WITH ONLY THE RIGHT SIDE
By Removing Two Pins, You Have the Capability to Rake with Only the Right Side of the Rake.

H & S 1000 Series Bi-Fold Wheel Hay Rakes

CENTER KICKER ASSEMBLY
A 2 or 3 Wheel Center Kicker Assembly is Optional for the Hi-Capacity Rakes.

H & S 1000 Series Bi-Fold Wheel Hay Rakes

OPTIONAL WIND BOARD
An Optional Rake Wheel Wind Board is Available for all H & S Rakes.


1000 SERIES BI-FOLD WHEEL HAY RAKE SPECIFICATIONS
MODEL 1460 1660
Wheel Diameter 60"
Teeth per Wheel 40
Tooth Diameter 7.5mm
Transport Width 8'8"
Transport Length 27'3" 30'3"
Windrow Width Adjustment 38" - 58"
Raking Width Hyd. Set Up to 28' Hyd. Set Up to 32'
Raking Wheel Hubs Ball Bearings
Wing Flex 3' Up or Down
Number of Transport Wheels 8
Hitch Jack Standard
Gauge Wheels 15"
Transport Wheels 15"
Dual Center Kicker Wheels Optional
Triple Center Kicker Wheels Optional
60" Rake Wheel Wind Boards Optional
Transport Lighting & Power Cord Optional
Safety Chain Optional

WARRANTY: SEE OPERATORS MANUAL FOR WARRANTY DETAILS AND LIMITATIONS. H&S RESERVES THE RIGHT TO CHANGE ITS PRODUCTS OR THE DESCRIPTION AT ANY TIME WITH OUT NOTICE OR OBLIGATION. MODELS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

Specifications & Designs Are Subject to Change Without Notice