IFE Model 'TS3213' 32" Opening, 13" Capacity Excavator Tree Shear & Grabber w/Hyd. Slew Ring Rotator & Positioner
IFE 'TS3213' Excavator Tree Shear & Grabber With Hydraulic Slew Ring Positioner - Durable & Basic Tree Shear with Grabber Is Made Efficiently Convenient With A Slew Ring Rotator!
GRAPPLE SPECIFICATIONS:
Intended For 6 To 15 Ton Excavators.
Hydraulic Requirement:
16GPM.
4351PSI Max.
Maximum Grapple Tip Opening Is 32".
Cuts To 13" Diameter!
Shearing Strength Is 41,000ft lbs!
Cylinder Barrel Is 5-1/2" Diameter!
Cylinder Rod Is 2-1/4" Diameter!
Grapple Pinches Within 1" Of Back Plate.
Length (Back of Exc. Coupler Conn to End Of Fixed Tine) 47".
Specifications are based on manufacturer provided data & subject to change.
'SLEW RING' RIGID ROTATOR WITH FLAT PLATE COUPLER SPECIFICATIONS:
Slewing Ring Type Rigid Rotators Hold Their Last Position Without Creeping, Which Means They Will Provide A Sharp, Distinct 'Rotation Start' & 'Distinct Rotation' Stop (Braking), Particularly Compared To Vane Type Rotators Which Will Creep A Bit From Last Position, But Provide A Softer 'Rotation Start' & 'Softer Rotation Stop'.
Slew Ring Type Rotators Are Intended For Extreme Loads, While Vane Type Rotators Can Be More Suitable For Longer Loads Than Can Introduce More Inertia At Starting & Stopping!
Rotator Turns 360° CONTINUOUSLY in Both Directions - Clockwise & Counter Clockwise!
Max Working Pressure is 4351PSI.
Specifications are based on manufacturer provided data & subject to change.
'TS3213' Excavator Tree Shear with Slew Ring Rigid Rotator
'TS3213' Excavator Tree Shear with Slew Ring Rigid Rotator
'TS3213' Excavator Tree Shear with Slew Ring Rigid Rotator At Work
'TS3213' Excavator Tree Shear with Slew Ring Rigid Rotator
'TS3213' Excavator Tree Shear with Slew Ring Rigid Rotator
'TS3213' Excavator Tree Shear with Slew Ring Rigid Rotator
Specifications & Designs Are Subject to Change Without Notice