IOWA FARM EQUIPMENT

IFE 'TS5020' Excavator Tree Shear & Grabber With Hydraulic Slew Ring Positioner - Durable & Basic Tree Shear with Grabber Is Made Efficiently Convenient With A Slew Ring Rotator!

GRAPPLE SPECIFICATIONS:

• Intended For 15 To 30 Ton Excavators.
• Hydraulic Requirement:
  • 32GPM.
  • 4351PSI Max.
• Maximum Grapple Tip Opening Is 50".
• Cuts To 20" Diameter!
• Shearing Strength Is 60,700ft lbs!
• Cylinder Barrel Is 6-1/2" Diameter!
• Cylinder Rod Is 2-3/4" Diameter!
• Grapple Pinches Within 1" Of Back Plate.
• Length (Back of Exc. Coupler Conn to End Of Fixed Tine) 69".
• Height In Closed Position Is 58".
• Height In Open Position Is 50".
• Overall Grapple Width Is 27-1/2".
• Maximum Working Pressure Is 4351psi.
• Grapple, Rotator, Hoses & Coupler Weighs 3,103lb's.
• Specifications are based on manufacturer provided data & subject to change.

'SLEW RING' RIGID ROTATOR WITH FLAT PLATE COUPLER SPECIFICATIONS:

• Slewing Ring Type Rigid Rotators Hold Their Last Position Without Creeping, Which Means They Will Provide A Sharp, Distinct 'Rotation Start' & 'Distinct Rotation' Stop (Braking), Particularly Compared To Vane Type Rotators Which Will Creep A Bit From Last Position, But Provide A Softer 'Rotation Start' & 'Softer Rotation Stop'.
  • Slew Ring Type Rotators Are Intended For Extreme Loads, While Vane Type Rotators Can Be More Suitable For Longer Loads Than Can Introduce More Inertia At Starting & Stopping!
• Rotator Turns 360° CONTINUOUSLY in Both Directions - Clockwise & Counter Clockwise!
• Max Working Pressure is 4351PSI.
• Specifications are based on manufacturer provided data & subject to change.