WRAG 'Basic XL300' Series Hydraulic Post Drivers
Loaded With The Best Features, Plus Offset Positioning & Hydraulic Center Leg!
(Available as Skid Steer Quick Attach)
'Basic XL300' 90° Swing, Telescoped, with Rock Spike

With the 90° Swing, Telescoping Offset Positioning, 4-Way Tilt & Hydraulic Center Leg Adjustment, Driving Posts on the Fence Center-Line is Efficient & Hassle Free, Eliminating the Need for (Repeatedly) Repositioning your Tractor for Precise Positioning. The 110,000lb’s of Hammering Force also Contributes to Efficiency & Straight Posts, Even in the Toughest Ground Conditions. For the Worst Ground Conditions, an Optional Rock Spike is available - WRAG Drivers include the Extra Spool Valve & Mounting Lugs (for the Rock Spike & Extractor) as Standard Features. The 'Basic XL300’ Driver includes the following Standard Features:

'Basic XL300' 90° Swing, Telescoped, with Rock Spike
'Basic XL300' 90° Swing, Fully Telescoped, w/Rock Spike
'Basic XL300' Centered, Telescoped, w/Rock Spike
'Basic XL300' Hydraulic Control Levers
'BASIC XL300' 3-POINT POST DRIVER
Max. Post Length w/36" Legs Fully Extended 9'-0" Post (Drives Down to 30" Above Grade) (*/**)
Max. Post Length w/Legs Fully Retracted 8'-0" Post (Drives Down to 18" Above Grade) (*/**)
Max. Post Diameter 10"
Drop Hammer Weight 660 lbs.
Driving Force 110,000 lbs. @ Full Stroke
Mast Length 10'-8" w/Legs Retracted
Hydraulic Tilt 22° Left & Right, Front & Rear
Hydraulic Swing 90° (Infinite Positioning)
Hydraulic Telescoping 15" Travel (Infinite Positioning)
Hydraulic Requirement Min 12GPM/1800PSI
Hydraulic Systems Open Center
(Plugs for Closed & Load Sensing Available)
Weight 1,940 lbs.
3-Point Hitch Double Clevis, CAT 2
Double Top Link Lugs for Quick Hitch Compatibility.
Not Suitable for Cat 1 Tractors!
NOTES:
*Dimensions are Conservative & Subject to Variation Based on Tractor 3-Point & Tire Sizes.
**Dimensions are as Measured on a 75HP Tractor w/30" Rear Tires.
'BASIC XL300' 3-POINT POST DRIVER
Max. Post Length w/36" Legs Fully Extended 9'-0" Post (Drives Down to 30" Above Grade) (*/**)
Max. Post Length w/Legs Fully Retracted 8'-0" Post (Drives Down to 18" Above Grade) (*/**)
Max. Post Diameter 10"
Drop Hammer Weight 660 lbs.
Driving Force 110,000 lbs. @ Full Stroke
Mast Length 10'-8" w/Legs Retracted
Hydraulic Tilt 22° Left & Right, Front & Rear
Hydraulic Swing 90° (Infinite Positioning)
Hydraulic Telescoping 15" Travel (Infinite Positioning)
Hydraulic Requirement Min 12GPM/1800PSI
Hydraulic Systems Open Center
(Plugs for Closed & Load Sensing Available)
Weight 1,940 lbs.
3-Point Hitch Double Clevis, CAT 2
Double Top Link Lugs for Quick Hitch Compatibility.
Not Suitable for Cat 1 Tractors!
NOTES:
*Dimensions are Conservative & Subject to Variation Based on Tractor 3-Point & Tire Sizes.
**Dimensions are as Measured on a 75HP Tractor w/30" Rear Tires.
Specifications & Designs Are Subject to Change Without Notice