WRAG SS660 Skid Steer Post Driver
Loaded With The Best Features!

WRAG Hector SSQA Post Driver Hydraulic Post Driver for Skid Steer Hydraulic Post Pounder
WRAG SS660 Driver shown with stabilizer leg fully recessed to drive as flush to grade as possible.

The WRAG SS660 Post Drivers' 660lb Hammer Weight produces up to 110,000lb’s of Hammering Force to Drive Posts Straight into the Toughest Ground Conditions. For the Worst Conditions, an optional Rock Spike is available - WRAG Drivers include the Extra Spool Valve & Mounting Lugs (for the Rock Spike & Extractor) as Standard Features. The SS660 Driver includes the following Standard Features:

  • Open Frame Design:
    • Provides maximum efficiency, versatility & flexibility, on any terrain, for positioning the Post to be as straight as possible!
    • Allows adding new posts into existing fence lines without contacting & damaging the existing fence wires!
    • Allows Driving Posts as Low as 6” Above Grade!
  • Self-Contained Hydraulic System:
    • Eliminates the clumsy & costly Return Line Kit (a nuisance to add & remove & route to the reservoir filler neck)!
    • Eliminates the risk of discharging hydraulic oil all over the engine compartment (from the Return Line Kit)!
    • Without the need of a model specific Return Line Kit, this Driver is universal to use on any make & model of Skid Steer!
  • 110,000lb's of Drop Hammer Pounding Force:
    • The Drop Hammer System provides Springless Driving Energy, eliminating daily maintenance (seasoning), and the potential disruption & expense associated with Spring failures!
    • Wrag's Drop Hammer System uses 7/8” dia. Industrial Poly & Cotton Braided Rope, which is very easy on your hands & won’t kink, or fray, offering a trouble free service life!
  • Hydraulic 'Left to Right' Tilt!
  • Hinged 'Arm' for the Drop Hammer Operation:
    • Hinged ‘Masts’ are a nuisance to set-up, require more pulleys, increases maintenance, as well as a loss of driving force!
  • Flow Control Valve:
    • Used to reduce the Hinged Arm cycle time for smoother operation, or to speed it up for faster operation (once you’re able to throttle & feather the controls)!
  • Controls Located for Maximum Safety & Ergonomic Convenience!
  • Stand for Upright Storage Included.


Sample Video in Rocky, Dry Ground: WRAG SS660 Post Driver with Stabilizer Leg Extended About 42”.

Wood Post Pounder
WRAG SS660 Post Driver at Right Angle

Railroad Tie Post Pounder
WRAG SS660 Post Driver at Left Angle

Skidloader Commercial Hydraulic Post Drivers
WRAG SS660 Post Driver shown with stabilizer leg fully recessed.

Commercial Duty Skid Steer Post Drivers
WRAG SS660 Post Driver shown with stabilizer leg fully recessed.

Skidloader Commercial Hydraulic Post Drivers
WRAG SS660 Post Driver with Stabilizer Leg Extended About 42”.

Skidloader Commercial Hydraulic Post Drivers
WRAG SS660 Post Driver with Stabilizer Leg Extended About 42”.

Skid Steer Post Driver
Flow Control Valve Close-Up.

WRAG Hector Heavy Duty Post Drivers
WRAG SS660 Attached, with Side View of Tilt Cylinder

WRAG Hector High Mast Skidsteer Post Drivers
WRAG SS660 Attached, with Front View of Tilt Cylinder

WRAG Hector Heavy Duty Post Drivers
WRAG SS660 Attached, with View of Hydraulic Controls.

WRAG Hector High Mast Skidsteer Post Drivers
WRAG Safety Shield

WRAG Diadem Post Driver Rockspike
Optional WRAG Rock Spike & Extractor
(Sample photo shown on 3-Pt WRAG Driver).

WRAG Diadem Post Driver Rockspike
Optional WRAG Rock Spike & Extractor
(Sample photo shown on 3-Pt WRAG Driver).


SS660 SPECIFICATIONS
MODEL SS660
Max. Post Length w/48" Leg Fully Extended 10'-0" (Drives to 4'-0" Above Grade)
Max. Post Length w/Leg Fully Retracted 7'-10" Post (Drives to 13" Above Grade)
Max. Post Diameter 8" (10" Optional)
Drop Hammer Weight 660 lbs. (330 lbs. Optional)
Driving Force 110,000 lbs. @ Full Stroke
Mast Length 10'-8" (w/Leg Retracted, on Stand)
Hydraulic Tilt 22°, Left & Right
Hydraulic Requirement Min. 1800 PSI/15 GPM
Hydraulic Systems Open Center (Plugs for Closed & Load Sensing Available)
Stand for Upright Storage Included (Not Shown in Photos)
Weight 1,290 lbs. (w/660 lb. Hammer)
Specifications & Designs Are Subject to Change Without Notice